Warning/Indicator Lights and Warning Sounds

If lights are on and the ignition is switched to ACC or off, a continuous beep sound will be heard when the driver's door is opened.

 

---

• When the ignition is switched to ACC, the “Ignition Not Switched Off (STOP) Warning Beep” (Search) overrides the lights-on reminder.

• A personalised function is available to change the sound volume for the lights-on reminder.

  Refer to Personalisation Features (Search).

Close Note

View Note

If a malfunction is detected in the air bag/front seat belt pretensioner systems and the warning light illumination, a warning beep sound will be heard for about 5 seconds every minute.

The air bag and seat belt pretensioner system warning beep sound will continue to be heard for approximately 35 minutes.

Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.

 

---

Do not drive the vehicle with the air bag/front seat belt pretensioner system warning beep sounding:

Driving the vehicle with the air bag/front seat belt pretensioner system warning beep sounding is dangerous. In a collision, the air bags and the front seat belt pretensioner system will not deploy and this could result in death or serious injury.

Contact an expert repairer, we recommend an Authorised Mazda Repairer to have the vehicle inspected as soon as possible.

Close Warning

View Warning

Front seat

If the vehicle speed exceeds about 20 km/h (12 mph) with the driver or front passenger's seat belt unfastened, a warning beep sounds continuously. If the seat belt remains unfastened, the beep sound stops once and then continues for about 90 seconds. The beep stops after the driver or front passenger's seat belt is fastened.

 

---

• Placing heavy items on the front passenger seat may cause the front passenger seat belt warning function to operate depending on the weight of the item.

• To allow the front passenger seat weight sensor to function properly, do not place and sit on an additional seat cushion on the front passenger seat. The sensor may not function properly because the additional seat cushion could cause sensor interference.

• When a small child sits on the front passenger seat, it is possible that the warning beep will not operate.

Close Note

View Note

Rear seat (Some Models)

The warning beep only sounds if a seat belt is unfastened after being fastened.

(European models)

If the driver's door is opened while the ignition is switched to ACC, a beep sound will be heard 6 times to notify the driver that the ignition has not been switched off (STOP) (for vehicles with a type A meter, messages are displayed in the instrument cluster). Left in this condition, the keyless entry system will not operate, the car cannot be locked, and the battery power will be depleted.

(Except European models)

If the driver's door is opened while the ignition is switched to ACC, a continuous beep sound will be heard to notify the driver that the ignition has not been switched off (STOP). Left in this condition, the keyless entry system will not operate, the car cannot be locked, and the battery power will be depleted.

If the request switch is pressed under the following conditions while the key is being carried, a beep will be heard for about 2 seconds to indicate that the front doors and the liftgate can not be locked.

• A door is open (door ajar included).

• The ignition has not been switched to off.

If the key is left in the luggage compartment/boot with all doors locked and the liftgate/boot lid closed, a beep sound is heard for about 10 seconds to remind the driver the key has been left in the luggage compartment/boot. If this happens, open the liftgate/boot lid by pressing the electric liftgate/boot lid opener and remove the key. A key removed from the luggage compartment/boot may not function because its functions may have been temporarily suspended. To restore the key function, perform the applicable procedure (Search).

If a key is left in the vehicle cabin and all the doors and the liftgate are locked using a separate key, a beep sound is heard for about 10 seconds to remind the driver that the key has been left in the vehicle cabin.

If this happens, the doors and the liftgate lock but the functions of the key left in the vehicle cabin may be temporarily suspended.

Perform the applicable procedure to restore the functions of the key (Search).

• If the driver's door is opened while engine idling is stopped, the warning sound operates to notify the driver that engine idling is stopped. It stops when the driver's door is closed.

• The warning sound operates if the following operations are performed while the engine idling is stopped. In such cases, the engine does not restart automatically to ensure safety. Start the engine using the normal method.

  • (European model)

    The driver's seat belt is unfastened and the driver's door is opened.

  • (Except European model)

    With the selector lever in the D or M (not in second gear fixed mode) position, the driver's seat belt is unfastened and the driver's door is opened.

If the vehicle is driven while “i-ELOOP charging” is displayed, a beep sound is heard. Make sure the message is no longer displayed before driving.

The vehicle speed alarm function is designed to alarm the driver via a single beep sound and a warning indication in the instrument cluster that the previously set vehicle speed has been exceeded.

You can change the vehicle speed setting at which the warning is triggered (Search).

The warning beep sound will be heard for about 3 seconds when there is any abnormality in tyre inflation pressures (Search).

Warns the driver of the possibility of icy roads when the outside temperature is low.

If the outside temperature is lower than about 4 °C (39 °F) , a beep sound is heard once and the outside temperature display flashes for about ten seconds. (Search)

If the system determines that the vehicle may depart from the lane while the system is operating, it sounds a warning sound.

(Lane-keep assist system)

The warning sound is activated when the driver takes his or her hands off the steering wheel while the lane-keep assist system is operating.

 

---

• The volume of the lane-keep assist system/LDWS warning sound can be changed.

  Refer to Personalisation Features (Search).

• The type of the lane-keep assist system/LDWS warning sound can be changed.

  Refer to Personalisation Features (Search)

Close Note

View Note

Driving forward

The warning beep operates when the direction indicator lever is operated to the side where the Blind Spot Monitoring (BSM) warning light is illuminated.

 

---

A personalised function is available to change the Blind Spot Monitoring (BSM) warning beep sound volume.

Refer to Personalisation Features (Search).

Close Note

View Note

Reversing

If a moving object such as a vehicle or two-wheeled vehicle approaches on the left or right from behind your vehicle, the Blind Spot Monitoring (BSM) warning sound is activated.

The warning beep operates if the steering wheel is not unlocked after the push button start is pressed. (Search)

The Mazda Radar Cruise Control (MRCC) system warnings notify the driver of system malfunctions and cautions on use when required.

Check based on the beep sound.

If there is the possibility of a collision with a vehicle ahead or an obstruction at the rear of the vehicle, a warning is indicated in the display and a warning sound is activated intermediately.

If the vehicle speed exceeds 120 km/h, a chime sounds for 5 seconds.

If the power steering system has a malfunction, the power steering malfunction light turns on or flashes and the buzzer operates at the same time.

Refer to Warning/Indicator Lights (Search).

The warning buzzer is activated under the following conditions:

• The vehicle is driven with the electric parking brake applied.

• The electric parking brake switch is pulled while the vehicle is driven.