When the seat belt is fastened, it will always be in the emergency locking mode.
In the emergency locking mode, the belt remains comfortable on the occupant and the
retractor will lock in position during a collision.
If the belt is locked and cannot be pulled out, retract the belt once, and then try
pulling it out slowly. If this fails, pull the belt strongly one time and loosen,
then pull it out again slowly.
(Seat Belt with Automatic Locking Mode)
When the seat belt is fastened, it will always be in the emergency locking mode until
it is switched to automatic locking mode by pulling it all the way out to its full
length. If the belt feels tight and hinders comfortable movement while the vehicle
is stopped or in motion, it may be in the automatic locking mode because the belt
has been pulled too far out. To return the belt to the more comfortable emergency
locking mode, wait until the vehicle has stopped in a safe, level area, retract the
belt fully to convert it back to emergency locking mode and then extend it around
you again.