Ignition Switch
Starting the Engine
Turning the Engine Off
i-stop

Turning the Engine Off

 


Do not stop the engine while the vehicle is moving:

Stopping the engine while the vehicle is moving for any reason other than in an emergency is dangerous. Stopping the engine while the vehicle is moving will result in reduced braking ability due to the loss of power braking, which could cause an accident and serious injury.

Close Warning
View Warning
  1. Stop the vehicle completely.

  2. Shift the selector lever to the P position and set the parking brake.

  3. Press the push button start to turn off the engine. The ignition position is off.

 


When leaving the vehicle, make sure the push button start is off.

Close Caution
View Caution

 


  • (SKYACTIV-G 2.0, SKYACTIV-G 2.5)

    The cooling fan in the engine compartment could turn on for a few minutes after the ignition is switched from ON to OFF, whether or not the A/C is on or off, to cool the engine compartment quickly.

  • If the system detects that the remaining battery power of the key is low when the ignition is switched from ON to ACC or OFF, the following is indicated.

    Replace with a new battery before the key becomes unusable.

    Refer to Key Battery Replacement (Search).

    (Vehicle equipped with Type A*1 instrument cluster)

    A message is indicated in the display of the instrument cluster.

    (Vehicle equipped with Type B*2 instrument cluster)

    The KEY indicator light (green) flashes for approximately 30 seconds.

    1. Refer to Type A (Search).

    2. Refer to Type B (Search).

    1. If the engine is turned off while the selector lever is in a position other than P, the ignition switches to ACC.

    Close Note
    View Note