Maintenance and CareScheduled MaintenanceScheduled Maintenance

Scheduled Maintenance

 

  • After the prescribed period, continue to follow the described maintenance at the recommended intervals.

  • As the result of visual examination or functional measurement of a system's operation (performance), correct, clean, or replace as required. (Inspect, and if necessary replace the air filter)

Close Note

Emission control and related systems

The ignition and fuel systems are highly important to the emission control system and to efficient engine operation. Do not tamper with them.

All inspections and adjustments must be made by an expert repairer, we recommend an Authorised Mazda Repairer.

Maintenance and CareScheduled MaintenanceScheduled Maintenance

Australia and New Zealand

Maintenance Interval

Number of months or kilometres, whichever comes first

Months

6

12

18

24

30

36

42

48

54

60

66

72

78

84

90

96

×1000 km

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

SKYACTIV-G 2.0 and SKYACTIV-G 2.5

Fuel filter

Replace every 150,000 km

Spark plugs

Replace every 120,000 km

Air filter*1

C

R

C

R

C

Evaporative system (if installed)

I

I

I

I

I

I

I

I

SKYACTIV-D 2.2

Fuel filter

R

R

R

R

Fuel injection system*2

I

I

I

Air filter*1

C

C

R

C

C

R

C

C

SKYACTIV-G 2.0, SKYACTIV-G 2.5 and SKYACTIV-D 2.2

Drive belts*3

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

Engine oil*4*5

R

R

R

R

R

R

R

R

R

R

R

R

R

R

R

R

Engine oil filter*4

R

R

R

R

R

R

R

R

R

R

R

R

R

R

R

R

Cooling system

I

I

I

I

I

I

I

I

Engine coolant*6

Replace at first 200,000 km or 10 years; after that, every 100,000 km or 5 years

Fuel lines and hoses

I

I

I

I

I

I

I

I

Battery*7

I

I

I

I

I

I

I

I

Brake lines, hoses and connections

I

I

I

I

I

I

I

I

Brake fluid*8

I

I

I

R

I

I

I

R

I

I

I

R

I

I

I

R

Parking brake

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

Power brake unit (Brake booster) and hoses

I

I

I

I

I

I

I

I

Disc brakes

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

Steering operation and linkages

I

I

I

I

I

I

I

I

Front and rear suspension, ball joints and wheel bearing axial play

I

I

I

I

I

I

I

I

Driveshaft dust boots

I

I

I

I

Exhaust system and heat shields

Inspect every 80,000 km

Bolts and nuts on chassis and body

T

T

T

T

T

T

T

T

All electrical system*9

I

I

I

I

I

I

I

I

Cabin air filter (if installed)

R

R

R

R

Tyres (including spare tyre) (with inflation pressure adjustment)*10

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

Tyre rotation*10*11

Rotate every 10,000 km or 6 months

Road test

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

M-MDS check of Vehicle Management and Safety Systems

I

I

I

I

I

I

I

I

Chart symbols:

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.

R: Replace

C: Clean

T: Tighten

Remarks:

  1. If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air filter more often than the recommended intervals.

  2. Implement the fuel injection amount correction.

  3. Also inspect the air conditioner drive belts, if installed.

    If the vehicle is operated primarily under any of the following conditions, inspect the drive belts more often than the recommended intervals.

    1. Driving in dusty conditions

    2. Extended periods of idling or low speed operation

    3. Driving for long period in cold temperatures or driving regularly at short distance only

    4. Driving in extremely hot conditions

    5. Driving in mountainous conditions continually

  4. If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter more often than the recommended intervals.

    1. Driving in dusty conditions

    2. Extended periods of idling or low speed operation

    3. Driving for long period in cold temperatures or driving regularly at short distance only

    4. Driving in extremely hot conditions

    5. Driving in mountainous conditions continually

  5. Reset the engine oil data after replacing the engine oil.

  6. Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may cause serious damage to the engine and cooling system.

  7. Inspect the battery electrolyte level, specific gravity and outer appearance. The sealed battery only requires an outer appearance inspection.

  8. If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.

  9. This is a full function check of electrical systems such as lights, wiper and washer systems (including wiper blades), and power windows.

  10. The Tyre Pressure Monitoring System (TPMS) initialization must be performed so that the system operates normally (if equipped).

  11. If the vehicle is operated primarily under any of the following conditions, rotate the tyres more often than the recommended intervals.

    1. Driving on bumpy roads, gravel roads, snowy roads or dirt roads

    2. Driving uphill and downhill frequently

    3. Repeated short-distance driving

    4. On roads having many roundabouts

 

 

Please ask Mazda dealer to check Mazda computer network to ensure there are no outstanding campaign or recall actions on the vehicle.

Close Note