Driving Tips

Check local regulations before using tyre chains.

 

---

• Chains may affect handling.

• Do not go faster than 50 km/h (30 mph) or the chain manufacturer's recommended limit, whichever is lower.

• Drive carefully and avoid bumps, holes, and sharp turns.

• Avoid locked-wheel braking.

• Do not use chains on a temporary spare tyre; it may result in damage to the vehicle and to the tyre.

• Do not use chains on roads that are free of snow or ice. The tyres and chains could be damaged.

• Chains may scratch or chip aluminium wheels.

Close Caution

View Caution

 

---

If your vehicle is equipped with the tyre pressure monitoring system, the system may not function correctly when using tyre chains.

Close Note

View Note

Install the chains on the front tyres only.

Do not use chains on the rear tyres.

Tyre chain selection (Europe)

Mazda recommends hexagon type steel ring chains. Select the proper type according to your tyre size.

 

---

Although Mazda recommends hexagon type steel ring chains, all chains within the installation specifications may be used.

Close Note

View Note

Installation specification (Europe)

When installing tyre chains, the distance between the tyre tread and the chain must be within the prescribed limits in the following table.

Installing the chains

1. Secure the chains on the front tyres as tightly as possible. Always follow the chain manufacturer's instructions.

2. Retighten the chains after driving 1/2―1 km (1/4―1/2 mile).