Read this first
Electric Parking Brake
The electric parking brake equipment applies the parking brake using an electric motor. When the electric parking brake is applied, the electric parking brake switch indicator light turns on.
Do not drive the vehicle with the electric parking brake applied:
If the vehicle is driven with the parking brake applied, the brake parts may generate heat and the brake system may not operate, leading to an accident.
Before driving, release the electric parking brake and verify that the electric parking brake indicator light is turned off.
-
The electric parking brake cannot be applied or released while the vehicle battery is dead.
-
An operation sound occurs when applying or releasing the electric parking brake, however, this does not indicate a malfunction.
-
If the electric parking brake is not used for long periods, an automatic inspection of the system is performed while the vehicle is parked. An operation sound can be heard, however, this does not indicate a problem.
-
When the electric parking brake is applied and the ignition is switched OFF, an operation sound can be heard, however, this does not indicate a problem.
-
The brake pedal may move while the electric parking brake is being applied or released, however, this does not indicate a problem.
-
If the electric parking brake switch is continually pulled while driving the vehicle, the electric parking brake will be applied and the electric parking brake warning beep will be activated. When the switch is released, the electric parking brake is released and the beep stops.
-
If the electric parking brake is applied with the ignition switched off or in ACC, the electric parking brake indicator light in the instrument cluster and the indicator light in the switch may turn on for 15 seconds.
-
When running the vehicle through an automatic car wash, it may be necessary to switch the ignition off with the parking brake released depending on the type of automatic car wash.
When applying the electric parking brake
The electric parking brake can be applied regardless of the ignition switch position.
Securely depress the brake pedal and pull up the electric parking brake switch.
The electric parking brake is applied and the electric parking brake indicator light and the electric parking brake switch indicator light turn on.
Refer to Warning/Indicator Lights (Search).
When releasing the electric parking brake
The electric parking brake can be released while the ignition is switched ON or the engine is running. When the electric parking brake is released, the electric parking brake indicator light and the electric parking brake switch indicator light turn off.
Electric parking brake manual release
Securely depress the brake pedal and press down the electric parking brake switch.
Firmly depress the brake pedal and press the electric parking brake switch.
If the electric parking brake switch is pressed without depressing the brake pedal, the display or indicator light in the instrument cluster notifies the driver that the brake is not depressed.
(Type A instrument cluster)
A message is displayed on the multi-information display in the instrument cluster.
Refer to Message Indicated in Multi-information Display (Search).
(Type B instrument cluster)
The brake pedal operation demand indicator light in the instrument cluster turns on.
Electric parking brake automatic release
If the accelerator pedal is depressed with the electric parking brake applied and all of the following conditions met, the parking brake is released automatically.
-
The engine is running.
-
The driver's door is closed.
-
The driver's seat belt is fastened.
(Manual transaxle)
-
The change lever is in a position other than neutral.
-
The clutch pedal is depressed halfway
(Automatic transaxle)
-
Selector lever is in the D, M, or R position
If something such as the driver's foot contacts the accelerator pedal with the engine running and the electric parking brake applied, the parking brake may be released automatically. If you do not intend to drive immediately, shift the change lever (manual transaxle) to the neutral position, or shift the selector lever (automatic transaxle) to the P or N position.
