Personalisation Features

You can change the function settings according to your preference.

• Personalisation features which can be changed differ depending on the vehicle specification.

• Personalisation features which can be changed may change without notice depending on software updates.

The following personalisation features can be set or changed by the customer or an Authorised Mazda Repairer. Consult an Authorised Mazda Repairer for details.

Personalisation features which can be changed differ depending on the specification.

Setting change method

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Safety] and select the setting item you want to change.

1. Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends that these systems remain On.

2. For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed. The warning sound is only a beep.

3. Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.

4. This system functions only when the navigation system is functioning.

5. When the ultrasonic sensors detect an obstruction, the contents indicated on the centre display switches to the 360°View Monitor. (Vehicles with 360°View Monitor)

You can change the function settings according to your preference.

• Personalisation features which can be changed differ depending on the vehicle specification.

• Personalisation features which can be changed may change without notice depending on software updates.

The following personalisation features can be set or changed by the customer or an Authorised Mazda Repairer. Consult an Authorised Mazda Repairer for details.

Personalisation features which can be changed differ depending on the specification.

Setting change method

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Vehicle] and select the setting item you want to change.

1. If the auto-wiper control is set to Off, the wiper lever position is set to intermittent operation.

2. Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends that these systems remain On.

3. The lights-on reminder settings can be changed at anytime, however, the lights-on reminder only operates when the auto headlight function is set to Off. Refer to Lights-On Reminder (Search).

4. Change the ambient light illumination level with the position lights or headlights turned on.

You can change the function settings according to your preference.

• Personalisation features which can be changed differ depending on the vehicle specification.

• Personalisation features which can be changed may change without notice depending on software updates.

The following personalisation features can be set or changed by the customer or an Authorised Mazda Repairer. Consult an Authorised Mazda Repairer for details.

Personalisation features which can be changed differ depending on the specification.

 

Door locks

Method for changing the auto lock/unlock functions using the door-lock switch

 

1. Other settings for the auto door lock function are available at an expert repairer, we recommend an Authorised Mazda Repairer. For details consult an expert repairer, we recommend an Authorised Mazda Repairer

1. Safely park the vehicle. All doors must remain closed.

2. Switch the ignition ON.

3. Press and hold the lock side of the door-lock switch within 20 seconds of switching the ignition ON, and make sure a beep sound is heard about 8 seconds afterwards.

4. Refer to the auto lock/unlock function setting table, determine the function number for the desired setting. Press the unlock side of the door-lock switch the same number of times as the selected function number (Ex. If you select function 2, press the unlock side of the switch only 2 times).

5. Three seconds after the function setting has been changed, a beep sound will beep in the amount of the selected function number. (Ex. Function number 3 = 3 beep sounds)

(Manual transaxle vehicles)

(Automatic transaxle vehicles)

Method for changing functions using the centre display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Vehicle] and select the setting item you want to change.

 

 

Advanced keyless entry system

How to change the volume of the door lock/unlock beep sound

1. Switch the ignition off and close all of the doors and the boot lid.

2. Open the driver's door.

3. Within 30 seconds of opening the driver's door, press and hold the LOCK button on the key for 5 seconds or longer. (All of the doors and the liftgate are locked and unlocked when the LOCK button on the key is pressed and held for 5 seconds.)

   The beep sound activates at the currently set volume. The setting changes each time the LOCK button on the key is pressed and the beep sound activates at the set volume. (If the beep sound has been set to not activate, it will not activate.)

4. The setting change is completed by doing any one of the following:

   • Switching the ignition to ACC or ON.

   • Closing the driver's door.

   • Opening the boot lid.

   • Not operating the key for 10 seconds.

   • Pressing any button except the LOCK button on the key.

   • Pressing a request switch.

Method for changing functions using the centre display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Vehicle] and select the setting item you want to change.

 

Active Driving Display

Method for changing functions using the centre display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [AD-Disp] and select the setting item you want to change.

 

Fuel Economy Monitor

Method for changing functions using the centre display

1. Select on the home screen to display the application screen.

2. Select the [Fuel Economy Monitor].

3. Select to display the Menu screen.

4. Select on the screen and select the setting item you want to change.

 

Display

Method for changing functions using the centre display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Display] and select the setting item you want to change.

Turn Display Off

When you select , the display turns off.

Turn Display Off and Show Clock

When you select , the screen turns off and the clock is displayed.

Auto/Day/Night

:

(With auto-light control)

Switches screen automatically according to position lights illumination condition. However, when the light sensor detects that the surrounding area is bright such as when the position lights are turned on in the daytime, the screen is switched to the daytime screen^*1

(Without auto-light control)

Switches screen automatically according to position lights illumination condition.^*1

: Daytime screen setting

: Nighttime screen setting

1. The display is constantly on daytime screen when the illumination dimmer is cancelled.

 

Sound quality

Method for changing functions using the centre display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Sound] and select the setting item you want to change.

1. Standard audio

2. Bose^® sound system

ALC (Automatic volume adjustment)

The automatic level control (ALC) is a feature that automatically adjusts audio volume and sound quality according to the vehicle speed. The volume increases in accordance with the increase in vehicle speed, and decreases as vehicle speed decreases.

Bose^® Centerpoint (Automatic surround level adjustment)

Centerpoint^®*3 lets vehicle owners enjoy a Bose^® surround sound experience from their existing MP3s and satellite radio.

Specifically engineered to meet the unique demands of reproducing surround sound in a vehicle.

Converts stereo signals to multiple channels allowing greater precision when reproducing the sound.

An enhanced algorithm to simultaneously create a wider, more spacious sound field.

Bose^® AUDIOPILOT (Automatic volume adjustment)

When driving, background noise can interfere with enjoying music.

AUDIOPILOT^®*4 noise compensation technology continuously adjusts the music to compensate for background noise and vehicle speed.

It reacts only to sustained noise sources and not intermittent ones, such as speed bumps.

An enhanced DSP algorithm allows faster and more effective compensation for unusual situations, such as driving on a very rough road or at high speeds.

3. Centerpoint^® is a registered trademark of Bose Corporation.

4. AUDIOPILOT^® is a registered trademark of Bose Corporation.

 

Clock

Method for changing functions using the centre display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [Clock] and select the setting item you want to change.

 

Each system

Method for changing functions using the centre display

1. Select on the home screen and display the setting screen.

2. Switch the tab to [System] and select the setting item you want to change.

1. Available only in display from the centre display.

 

Running lights

If you want to change the running lights setting, please consult an Authorised Mazda Repairer .

 

Rear window defogger

If you want to change the rear window defogger setting, please consult an Authorised Mazda Repairer .

1. The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of the rear window defogger has been changed to Continuous.