Interior Equipment
Sunvisors
When you need a sunvisor, lower it for use in front or swing it to the side.

Interior Lights
Do not leave the lights on for long periods while the engine is turned off. Otherwise the battery power could be depleted.
Overhead Lights
Type A
Switch Position |
Overhead Lights |
---|---|
![]() |
Light off |
![]() |
|
![]() |
Light on |

The rear map lights also turn on and off when the overhead light switch is operated.
Type B
Switch |
Overhead Lights |
---|---|
|
The DOOR OFF switch can be switched between the DOOR position and DOOR OFF position. DOOR position
DOOR OFF position
|
|
Press the switch to turn it on. Press the switch again to turn off the lights. |

Front Map Lights
Type A
When the overhead light switch is in the door or off position, press the lens to illuminate the front map lights, and then press the lens again to turn them off.

The front map lights will not turn off even if the lens is pressed in the following cases:
-
The overhead light switch is in the ON position.
-
The overhead light switch is in the door position with the door open.
-
The illuminated entry system is on.
Type B
Press the switch to illuminate the front map lights, and then press the switch again to turn them off.

The front map lights will not turn off even if the switch is pressed in the following cases:
-
The overhead lights turn on by operating the overhead ON/OFF switch (
).
-
The overhead lights turn on in conjunction with a door opening/closing.
-
The illuminated entry system is on.
Rear Map Lights
Type A
When the overhead light switch is in the door or off position, press the lens to illuminate a rear map light, and then press the lens again to turn it off.

-
Once the rear map lights have been turned off, they will turn on and off depending on the position to which the overhead light is switched.
-
The rear map lights will not turn off even if the lens is pressed in the following cases:
-
The overhead light switch is ON.
-
The overhead light switch is in the door position with the door open.
-
The illuminated entry system is on.
-
Type B
Press the switch to illuminate the rear map lights, and then press the switch again to turn them off.

-
Once the rear map lights have been turned off, they will turn on and off in conjunction with the overhead light operation.
-
The rear map lights will not turn off even if the switch is pressed in the following cases:
-
The overhead lights turn on by operating the overhead ON/OFF switch (
).
-
The overhead lights turn on in conjunction with a door opening/closing.
-
The illuminated entry system is on.
-
Luggage Compartment Lights (Wagon)

Switch Position |
Luggage Compartment Light |
---|---|
![]() |
Light off |
![]() |
Light on when the liftgate is open |
Boot Light
The boot light is on when the lid is open and off when it's closed.

To prevent the battery from being discharged, do not leave the boot open for a long period when the engine is not running.
Courtesy Lights
Turns on when any door is open or the illuminated entry system is on.

Ambient Light (Some Models)
An ambient light continuously turn on when the ignition is switched ON.
An ambient light dim when the position lights or headlights are turned on.

-
An ambient light turn on or off in conjunction with the illuminated entry system when the ignition is switched OFF.
-
The ambient light illumination level can be changed while the position lights or headlights are turned on.
Refer to Personalisation Features (Search).
Illuminated Entry System
The overhead lights and courtesy lights turn on when any of the following operations is done with the overhead light switch in the DOOR position.
The ambient lights turn on regardless of the overhead light switch position.
-
The driver's door is unlocked with the ignition is switched OFF.
-
The ignition is switched OFF with all doors closed.
-
The illumination time differs depending on the operation.
-
Battery saver
If an interior light is left on with the ignition switched OFF, the light is turned off automatically after about 30 minutes to prevent battery depletion.
-
The operation of the illuminated entry system can be changed.
Refer to Vehicle Equipment (Search).
-
(Type B)
The illumination entry system does not operate in conjunction with the overhead lights when the overhead lights are turned on using the overhead light ON/OFF switch.
Accessory Sockets
Only use genuine Mazda accessories or the equivalent requiring no greater than 120 W (DC 12 V, 10 A).
The ignition must be switched to ACC or ON.
Centre

Rear (Wagon)

-
To prevent accessory socket damage or electrical failure, pay attention to the following:
-
Do not use accessories that require more than 120 W (DC 12 V, 10 A).
-
Do not use accessories that are not genuine Mazda accessories or the equivalent.
-
Close the cover when the accessory socket is not in use to prevent foreign objects and liquids from getting into the accessory socket.
-
Correctly insert the plug into the accessory socket.
-
Do not insert the cigarette lighter into the accessory socket.
-
-
Noise may occur on the audio playback depending on the device connected to the accessory socket.
-
Depending on the device connected to the accessory socket, the vehicle's electrical system may be affected, which could cause the warning light to illuminate. Disconnect the connected device and make sure that the problem is resolved. If the problem is resolved, disconnect the device from the socket and switch the ignition off. If the problem is not resolved, consult an expert repairer, we recommend an Authorised Mazda Repairer.
To prevent discharging of the battery, do not use the socket for long periods with the engine off or idling.
Connecting the accessory socket
-
Open the lid.
-
Pass the connection plug cord through the cutout of the console and insert the plug into the accessory socket.

Overhead Console
This console box is designed to store eyeglasses or other accessories.
Push and release to open.
