Air-Conditioning System

Operating Tips

Operate the air-conditioning system with the engine running.
To prevent the battery from being discharged, do not leave the fan control switch on for a long period of time with the ignition switched ON when the engine is not running.
(With i-stop)

The airflow amount may decrease slightly while the i-stop function is operating.
Clear all obstructions such as leaves, snow and ice from the bonnet and the air inlet in the cowl grille to improve the system efficiency.
Use the air-conditioning system to defog the windows and dehumidify the air.
The recirculate mode should be used when driving through tunnels or while in a traffic jam, or when you would like to shut off outside air for quick cooling of the interior.
Use the outside air position for ventilation or windscreen defrosting.
If the vehicle has been parked in direct sunlight during hot weather, open the windows to let warm air escape, then run the air-conditioning system.

Run the air conditioner about 10 minutes at least once a month to keep internal parts lubricated.
Have the air conditioner checked before the weather gets hot. Lack of refrigerant may make the air conditioner less efficient.

The refrigerant specifications are indicated on a label attached to the inside of the engine compartment. If the wrong type of refrigerant is used, it could result in a serious malfunction of the air conditioner. Consult a professional, government certified repairer for the inspection or repair because a special device is required for the air conditioner maintenance.

For details, consult an expert repairer, we recommend an Authorised Mazda Repairer.

Vent Operation

Adjusting the Vents

Directing airflow

To adjust the direction of airflow, move the adjustment knob.

When using the air conditioner under humid ambient temperature conditions, the system may blow fog from the vents. This is not a sign of trouble but a result of humid air being suddenly cooled.

The air vents can be fully opened and closed by operating the dial.

Close Note

View Note

Side Vents

Centre Vents

Rear Vents (Some Models)

Selecting the Airflow Mode

The location airflow exits the air vents and the airflow amount may change depending on the open or close status of the air vents.

Close Note

View Note

Fully Automatic Type

Air-conditioning system information is displayed on the display.

Control Switches

AUTO switch

By pressing the AUTO switch the following functions will be automatically controlled in accordance with the selected set temperature:

Airflow temperature
Amount of airflow
Selection of airflow mode
Outside/Recirculated air selection
Air conditioner operation
A/C or A/C ECO selection

AUTO switch indicator light

When on, it indicates auto operation, and the system will function automatically.
If any of the following switches are operated while in auto control, the AUTO switch indicator turns off.
- Mode selector switch
- Fan control switch
- Windscreen defroster switch
  
  The functions for switches other than those operated continue to operate in auto control.

Close Note

View Note

Power switch (Fan On/Off)

The air-conditioning system turns on or off by pressing the power switch.

Temperature control dial

This dial controls temperature. Turn it clockwise for hot and anticlockwise for cold.

Turn the temperature control dial to adjust the temperature between 15 °C (60 °F) and 29 °C (84 °F).

When the SYNC switch is on:

Turn the driver temperature control dial to control the temperature throughout the entire cabin.
When the SYNC switch is off:

Turn the driver or front passenger temperature control dial to independently control the temperature on each side of the cabin.

The air-conditioning system changes to the individual operation mode (SYNC switch indicator light turns off) by turning the front passenger temperature control dial even when the SYNC switch is on, which allows individual control of the set temperature for the driver and front passenger.
The temperature units for the temperature setting display can be changed in conjunction with the temperature units for the outside temperature display.

(Instrument cluster Type A)

Refer to Outside Temperature Display (Search).

(Instrument cluster Type B)

Refer to Outside Temperature Display (Search).

(Instrument cluster Type C)

Refer to Outside Temperature Display (Search).

Close Note

View Note

Fan control switch

The fan has 7 speeds. The selected speed will be displayed.

Mode selector switch

The desired airflow mode can be selected (Search).

With the airflow mode set to the position and the temperature control dial set at a medium temperature, heated air is directed to the feet and air at a comparably lower temperature will flow through the central, left and right vents.
To set the air vent to , press the windscreen defroster switch.
In the position, the outside air position is automatically selected.

Close Note

View Note

A/C switch

Pressing the A/C switch while the AUTO switch is turned on will turn off the air conditioner (cooling/dehumidifying functions).

The on/off of the air conditioner switches each time the A/C switch is pressed.

Changes as follows each time the A/C switch is pressed.

A/C→A/C ECO→Stop

The air conditioner operates when the A/C switch is pressed while the air conditioner is turned off.
The A/C ECO function is designed to economize use of the air-conditioning system. “A/C ECO” is displayed to indicate that the air-conditioning system is operating at optimum control.
The air conditioner may not function when the outside temperature approaches 0 °C (32 °F).

Close Note

View Note

Air intake selector

Outside or recirculated air positions can be selected. Press the switch to select outside/recirculated air positions.

Recirculated air position (indicator light turns on)

Outside air is shut off. Use this position when going through tunnels, driving in congested traffic (high engine exhaust areas) or when quick cooling is desired.

Outside air position (indicator light turns off)

Outside air is allowed to enter the cabin. Use this mode for ventilation or windscreen defrosting.

Do not recirculate the air in the cabin during cold or rainy weather:

Recirculating the air in the cabin during cold and rainy weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident.

Close Warning

View Warning

SYNC (Synchronized Temperature) switch

Use the SYNC switch to change the mode between the individual operation (driver and passenger) and interconnection (simultaneous) modes.

Interconnection mode (indicator light turns on)

The set temperature for the driver and front passenger is controlled simultaneously.

Individual operation mode (indicator light turns off)

The set temperature can be controlled individually for the driver and front passenger.

Windscreen defroster switch

Press the switch to defrost the windscreen and front door windows.

Refer to Windscreen Defrosting and Defogging (Search).

Rear window defogger switch

Press the rear window defogger switch to defrost the rear window.

Refer to Rear Window Defogger (Search).

Operation of Automatic Air Conditioner

Press the AUTO switch. Selection of the airflow mode, air intake selector and amount of airflow will be automatically controlled.
Use the temperature control dial to select a desired temperature.

If you want to set the temperature on the front passenger's side separately from the driver's side, turn the front passenger temperature control dial to switch the mode automatically to the individual operation mode and set the temperature for the front passenger's side.

To turn off the system, press the power switch.

Set the control dial to the recommended temperature of 22 °C (72 °F), and then adjust it as desired.
Setting the temperature to maximum hot or cold will not provide the desired temperature at a faster rate.
When selecting heat, the system will restrict airflow until the engine has warmed to prevent cold air from blowing out of the vents.

Close Note

View Note

Windscreen Defrosting and Defogging

Press the windscreen defroster switch.

In this position, the outside air position is automatically selected, and the air conditioner automatically turns on. The air conditioner will directly dehumidify the air to the front windscreen and side windows (Search).

Airflow amount will be increased.

Set the temperature control to the hot or warm position when defogging ( position):

Using the position with the temperature control set to the cold position is dangerous as it will cause the outside of the windscreen to fog up. Your vision will be hampered, which could lead to a serious accident.

Close Warning

View Warning

Use the temperature control dial to increase the air flow temperature and defog the windscreen more quickly.

Close Note

View Note

Sunlight/Temperature Sensor

Sunlight sensor

Do not place objects on the sunlight sensor. Otherwise, the interior temperature may not adjust correctly.

Interior temperature sensor

Do not cover the interior temperature sensor. Otherwise, the interior temperature may not adjust correctly.