Read this first
Power Windows
The ignition must be switched ON for the power windows to operate.
Make sure the opening is clear before closing a window:
Closing a power window is dangerous. A person's hands, head, or even neck could be caught by the window and result in serious injury or even death. This warning applies especially to children.
Never allow children to play with power window switches:
Power window switches that are not locked with the power window lock switch would allow children to operate power windows unintentionally, which could result in serious injury if a child's hands, head or neck becomes caught by the window.
To prevent burning out the fuse and damaging the power window system, do not open or close both windows at once.
A power window may no longer open/close if you continue to press the switch after opening/closing the power window. If the power window does not open/close, wait a moment and then operate the switch again.
Operating the Power Windows
-
The passenger window can be operated with each door switch when the power window lock switch on the driver's door is in the unlocked position (Search).
-
The passenger window can also be operated using the master control switches on the driver's door.
Normal opening/closing
To open the window to the desired position, lightly hold down the switch.
To close the window to the desired position, lightly pull up the switch.
Auto-opening
To fully open the window automatically, press the switch completely down.
To stop the window partway, pull or press the switch in the opposite direction and then release it.
The power window cannot be fully closed while the door is open.
Power window system initialization procedure
If the battery was disconnected during vehicle maintenance, or for other reasons (such as a switch continues to be operated after the window is open/closed), the window will not fully open automatically.
Resetting of the automatic function can be performed using the master control switches or each passenger door switch.
The power window auto function reset procedure can be done on both door switches. The power window auto function will only resume on the power window that has been reset.
-
Close the doors and the convertible top.
-
Switch the ignition ON.
-
Make sure that the power window lock switch located on the driver's door is not depressed.
-
Press the switch and fully open the window.
-
Pull up the switch to fully close the window and continue holding the switch for about 2 seconds after the window fully closed.
-
Repeat Steps 4-5 for the passenger power window while seated in the passenger seat.
-
Make sure that the power windows operate correctly using the door switches.
After the system has been re-initialized, passenger window can be fully opened automatically using the master control switches.
If the automatic power window operation does not operate normally while the doors or convertible top are opened/closed, reset it using the previous procedures.
Engine-off power window operation
The power window can be operated for about 40 seconds after the ignition is switched from ON to off with both doors closed. If any door is opened, the power window will stop operating.
For engine-off operation of the power window, the switch must be held up firmly throughout window closure because the auto-closing function will be inoperable.
Power Window Lock Switch
This feature prevents the passenger's power window from operating. Keep this switch in the locked position while children are in the vehicle.
Locked position (button depressed):
Only the driver's power window can be operated.
Unlocked position (button not depressed):
Both power windows on each door can be operated.
(With door-lock switch)
(Without door-lock switch)
When the power window lock switch is in the locked position, the light on the passenger power window switch turns off. The light may be difficult to see depending on the surrounding brightness.
