Read this first
Transmission Ranges
-
The shift position indicator light in the instrument cluster illuminates. Refer to Warning/Indicator Lights (Search).
-
The selector lever must be in P or N to operate the starter.
P (Park)
P locks the transmission and prevents the rear wheels from rotating.
Always set the selector lever to P and set the parking brake:
Only setting the selector lever to the P position without using the parking brake to hold the vehicle is dangerous. If P fails to hold, the vehicle could move and cause an accident.
-
Shifting into P, N or R while the vehicle is moving can damage your transmission.
-
Shifting into a driving gear or reverse when the engine is running faster than idle can damage the transmission.
R (Reverse)
In position R, the vehicle moves only backward. You must be at a complete stop before shifting to or from R, except under rare circumstances as explained in Rocking the Vehicle (Search).
(With parking sensor system)
When the selector lever is shifted to the R position with the ignition switched ON, the parking sensor system is activated and a beep sound is heard.
Refer to Parking Sensor System (Search).
N (Neutral)
In N, the wheels and transmission are not locked. The vehicle will roll freely even on the slightest incline unless the parking brake or brakes are on.
If the engine is running faster than idle, do not shift from N or P into a driving gear:
It's dangerous to shift from N or P into a driving gear when the engine is running faster than idle. If this is done, the vehicle could move suddenly, causing an accident or serious injury.
Do not shift into N when driving the vehicle:
Shifting into N while driving is dangerous. Engine braking cannot be applied when decelerating which could lead to an accident or serious injury.
Do not shift into N when driving the vehicle. Doing so can cause transmission damage.
Apply the parking brake or depress the brake pedal before moving the selector lever from N to prevent the vehicle from moving unexpectedly.
D (Drive)
D is the normal driving position. From a stop, the transmission will automatically shift through a 6-gear sequence.
M (Manual)
M is the manual shift mode position. Gears can be shifted up or down by operating the selector lever. Refer to Manual Shift Mode (Search).
