i-ACTIVSENSE (Some Models)

Adaptive Front Lighting System (AFS) (Some Models)

High Beam Control System (HBC) (Some Models)

Lane Departure Warning System (LDWS) (Some Models)

Blind Spot Monitoring (BSM) System (Some Models)

Rear Cross Traffic Alert (RCTA) (Some Models)

Adjustable Speed Limiter (Some Models)

Forward Sensing Camera (FSC) (Some Models)

Radar Sensors (Rear) (Some Models)

When Driving i-ACTIVSENSE Blind Spot Monitoring (BSM) System (Some Models)

Blind Spot Monitoring (BSM) Switch

When the Blind Spot Monitoring (BSM) switch is pressed, the Blind Spot Monitoring (BSM) and Rear Cross Traffic Alert (RCTA) systems are turned off and the BSM OFF Indicator Light in the instrument cluster turns on.

If the switch is pressed again, the Blind Spot Monitoring (BSM) and Rear Cross Traffic Alert (RCTA) systems become operable and the BSM OFF Indicator Light turns off.

When the ignition is switched off, the condition before the system was turned off is maintained. For example, if the ignition is switched OFF while the Blind Spot Monitoring (BSM) and Rear Cross Traffic Alert (RCTA) systems are operational, the Blind Spot Monitoring (BSM) and Rear Cross Traffic Alert (RCTA) systems remain operational the next time the ignition is switched ON.
The Blind Spot Monitoring (BSM) and Rear Cross Traffic Alert (RCTA) systems are turned off when the battery is disconnected such as when the battery terminals or fuses have been removed and re-installed. To turn the Blind Spot Monitoring (BSM) and Rear Cross Traffic Alert (RCTA) systems back on, press the Blind Spot Monitoring (BSM) switch.

Close Note

View Note