Aerial
Operating Tips for Audio System
Audio Set [Type A (non-touchscreen)]
Audio Set [Type B/Type C (touchscreen)]
Audio Control Switch Operation (Some Models)
AUX/USB mode

Clock

Setting the time

The clock can be set at any time when the ignition is switched to ACC or ON.

  1. To adjust the time, press the clock button () for about 2 seconds until a beep is heard.

  2. The clock's current time will flash.

    Time adjustment

    • To adjust the time, press the hour/minute set button (, ) while the clock's current time is flashing.

    • The hours advance while the hour set button () is pressed. The minutes advance while the minute set button () is pressed.

  3. Press the clock button () again to start the clock.

Time resetting

  1. Press the clock button () for about 2 seconds until a beep is heard.

  2. Press the :00 button (1).

  3. When the button is pressed, the time will be reset as follows:

    (Example)

    12:01―12:29→12:00

    12:30―12:59→1:00

 


  • When the :00 button (1) is pressed, the seconds will start at “00”.

  • Switching between 12 and 24-hour clock time:

    Press the menu button () several times until 12 and 24-hour clock time are displayed. Turn the audio control dial in either direction, select the desired clock setting while the preferred clock time is flashing.

Close Note
View Note