To Set Speed

  1. (With Adjustable Speed Limiter (ASL))

    Activate the cruise control system by pressing the MODE switch. The cruise main indicator light (amber)/cruise main indication (white) turns on.

    (Without Adjustable Speed Limiter (ASL))

    Activate the cruise control system by pressing the ON switch. The cruise main indicator light (amber)/cruise main indication (white) turns on.

  2. Accelerate to the desired speed, which must be more than 25 km/h (16 mph).

  3. Set the cruise control by pressing the SET/ switch at the desired speed. The cruise control is set at the moment the SET/ switch is pressed. Release the accelerator pedal simultaneously. The cruise set indicator light/cruise set indication (green) turns on.

 

  • The cruise control speed setting cannot be performed under the following conditions:

    • (Automatic transmission)

      The selector lever is in the P or N position.

    • (Manual transmission)

      The shift lever is in the neutral position.

    • The parking brake is applied.

    • (Vehicles with Adjustable Speed Limiter (ASL))

      The MODE switch for the Adjustable Speed Limiter (ASL) is pressed.

  • Release the SET/ or RESUME/ switch at the desired speed, otherwise the speed will continue increasing while the RESUME/ switch is pressed and held, and continue decreasing while the SET/ switch is pressed and held (except when the accelerator pedal is depressed).

  • On a steep grade, the vehicle may momentarily slow down while ascending, or speed up while descending.

  • The cruise control will cancel if the vehicle speed decreases below 21 km/h (13 mph) when climbing a steep grade.

  • The cruise control may cancel at about 15 km/h (9 mph) below the preset speed such as when climbing a long, steep grade.

Close Note
View Note

The vehicle speed preset using the cruise control is displayed in the instrument cluster.

Page top