Cruise Control

Cruise Control (Some Models)

Cruise Main Indication (White)/Cruise Set Indication (Green), Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green)

Type A instrument cluster

(Cruise main indication (white))

The indication turns on (white) when the cruise control system is activated.

(Cruise set indication (green))

The indication turns on (green) when a cruising speed has been set.

 

Type B instrument cluster

(Cruise main indicator light (amber))

The indicator light turns on (amber) when the cruise control system is activated.

(Cruise set indicator light (green))

The indicator light turns on (green) when a cruising speed has been set.

To Set Speed

  1. (With Adjustable Speed Limiter (ASL))

    Activate the cruise control system by pressing the MODE switch. The cruise main indicator light (amber)/cruise main indication (white) turns on.

    (Without Adjustable Speed Limiter (ASL))

    Activate the cruise control system by pressing the ON switch. The cruise main indicator light (amber)/cruise main indication (white) turns on.

  2. Accelerate to the desired speed, which must be more than 25 km/h (16 mph).

  3. Set the cruise control by pressing the SET/ switch at the desired speed. The cruise control is set at the moment the SET/ switch is pressed. Release the accelerator pedal simultaneously. The cruise set indicator light/cruise set indication (green) turns on.

 

  • The cruise control speed setting cannot be performed under the following conditions:

    • (Automatic transmission)

      The selector lever is in the P or N position.

    • (Manual transmission)

      The shift lever is in the neutral position.

    • The parking brake is applied.

    • (Vehicles with Adjustable Speed Limiter (ASL))

      The MODE switch for the Adjustable Speed Limiter (ASL) is pressed.

  • Release the SET/ or RESUME/ switch at the desired speed, otherwise the speed will continue increasing while the RESUME/ switch is pressed and held, and continue decreasing while the SET/ switch is pressed and held (except when the accelerator pedal is depressed).

  • On a steep grade, the vehicle may momentarily slow down while ascending, or speed up while descending.

  • The cruise control will cancel if the vehicle speed decreases below 21 km/h (13 mph) when climbing a steep grade.

  • The cruise control may cancel at about 15 km/h (9 mph) below the preset speed such as when climbing a long, steep grade.

Close Note
View Note

The vehicle speed preset using the cruise control is displayed in the instrument cluster.

To Decrease Cruising Speed

Press the SET/ switch and hold it. The vehicle will gradually slow.

Release the switch at the desired speed.

 

Press the SET/ switch and release it immediately to adjust the preset speed. Multiple operations will decrease the preset speed according to the number of times it is operated.

Decreasing speed with a single SET/ switch operation

Instrument cluster display for vehicle speed indicated in km/h: 1 km/h (0.6 mph)

Instrument cluster display for vehicle speed indicated in mph: 1 mph (1.6 km/h)

Page top