Locking, Unlocking with Request Switch (With the advanced keyless function)
Both doors and the boot lid, fuel-filler flap can be locked/unlocked by pressing the request switch while the key is being carried.
To lock
To lock the doors and the boot lid, fuel-filler flap, press the request switch and the hazard warning lights will flash once.
(Except European models)
A beep sound will be heard once.
To unlock
To unlock the doors and the boot lid, fuel-filler flap, press the request switch and the hazard warning lights will flash twice.
(Except European models)
A beep sound will be heard twice.
-
Confirm that both doors and the boot lid, fuel-filler flap are securely locked.
-
Both doors and the boot lid, fuel-filler flap cannot be locked when any door is open.
-
It may require a few seconds for the doors to unlock after the request switch is pressed.
-
(European models)
The setting can be changed so that a beep sound is heard for confirmation when the doors and the boot lid, fuel-filler flap are locked/unlocked using a request switch.
(Except European models)
A beep sound is heard for confirmation when the doors and the boot lid, fuel-filler flapare locked/unlocked using the request switch. If you prefer, the beep sound can be turned off.
The volume of the beep sound can also be changed. Refer to Personalisation Features (Search).
Use the following procedure to change the setting.
-
Switch the ignition off and close both of the doors and the boot lid.
-
Open the driver's door.
-
Within 30 seconds of opening the driver's door, press and hold the LOCK button on the key for 5 seconds or longer.
The beep sound activates at the currently set volume. The setting changes each time the LOCK button on the key is pressed and the beep sound activates at the set volume. (If the beep sound has been set to not activate, it will not activate.)
-
The setting change is completed by doing any one of the following:
-
Switching the ignition to ACC or ON.
-
Closing the driver's door.
-
Opening the boot lid.
-
Not operating the key for 10 seconds.
-
Pressing any button except the LOCK button on the key.
-
Pressing a request switch.
-
-
-
(With theft-deterrent system)
The hazard warning lights flash when the theft-deterrent system is armed or turned off.
Refer to Theft-Deterrent System (Search).
-
(With double locking system)
Pressing the request switch twice within 3 seconds will activate the double locking system.
Refer to Double Locking System (Search).
-
The setting can be changed so that the doors and the boot lid, fuel-filler flap are locked automatically without pressing the request switch.
Refer to Personalisation Features (Search).
(Walk-away auto lock function)
A beep sound is heard when both doors are closed while the advanced key is being carried. Both doors and the boot lid, fuel-filler flap are locked automatically after about three seconds when the advanced key is out of the operational range. Also, the hazard warning lights flash once. (Even if the driver is in the operational range, both doors and the boot lid, fuel-filler flap are locked automatically after about 30 seconds.) If you are out of the operational range before the doors and the boot lid are completely closed or another key is left in the vehicle, the walk-away auto lock function will not work. Always make sure that both doors and the boot lid are closed and locked before leaving the vehicle. The walk-away auto lock function does not close the power windows.
-
(Auto re-lock function)
After unlocking with the request switch, both doors and the boot lid, fuel-filler flap will automatically lock if any of the following operations are not performed within about 30 seconds. If your vehicle has a theft-deterrent system, the hazard warning lights will flash for confirmation.
The time required for the doors and the boot lid, fuel-filler flap to lock automatically can be changed.
Refer to Personalisation Features (Search).
-
Opening a door or the boot lid.
-
Switching the ignition to any position other than off.
-
