Security System

If the theft deterrent system has been armed while any of the following conditions are present, cancel the intrusion sensor to prevent the alarm from triggering unnecessarily.

• Leaving the vehicle with a movable object, passengers or pets remaining inside.

• Leaving an object inside the vehicle that can roll around, such as when the vehicle is placed on a tilting, unstable surface when being shipped.

• Hanging small objects/accessories in the vehicle, or placing other items which can move easily inside the vehicle.

• Parking in an area where there is strong vibration or loud noise.

• When using a high pressure or automatic car wash.

• Continuous shock and vibration from hail or thunder and lightning is transmitted to the vehicle.

• Doors are locked with a window left open.

• An accessory heater or device that produces moving air and vibration operates while the theft deterrent system is armed.

 

---

If any door or the boot lid remains closed for 30 seconds, both doors and the boot lid automatically re-lock and the theft deterrent system arms even if a window or the convertible top is left open.

Close Note

View Note

To cancel the intrusion sensor, press the intrusion sensor cancel button on the transmitter within 20 seconds after pressing the lock button.

The hazard warning lights will flash 3 times.

 

---

• To reactivate the intrusion sensor, turn off the armed theft-deterrent system and then rearm it.

• The intrusion sensor is operational when the theft-deterrent system is armed. To cancel the intrusion sensor, press the intrusion sensor cancel button each time the theft-deterrent system is armed.

Close Note

View Note