Audio Set [Type B (touchscreen)]
Volume/Display/Sound Controls
Volume adjustment
Turn the commander switch volume dial. The volume switch on the steering switch can also be pressed.
Audio sound adjustment
Select the 
icon on the home screen to display the Settings screen.
Select the 
tab to select the item you would like to change.
|
Indication |
Setting value |
|---|---|
|
Bass (Low pitch sound) |
|
|
Treble (Treble sound) |
|
|
Fade (Front/Rear volume balance) |
Front: Front speaker volume enhancement Rear: Rear speaker volume enhancement |
|
Balance (Left/right volume balance) |
Right: Right speaker volume enhancement Left: Left speaker volume enhancement |
|
ALC*1 (Automatic volume adjustment) |
Off―Adjustment at seven levels |
|
Bose® AudioPilot*2 (Automatic volume adjustment) |
On/Off |
|
Beep (Audio operation sound) |
On/Off |
Side: Low pitch enhancement
Side: Low pitch reduction-
Standard audio
-
Bose® sound system
ALC (Automatic volume adjustment)
The automatic level control (ALC) is a feature that automatically adjusts audio volume and sound quality according to the vehicle speed. The volume increases in accordance with the increase in vehicle speed, and decreases as vehicle speed decreases.
Bose® AudioPilot (Automatic volume adjustment)
When driving, background noise can interfere with enjoying music.
AudioPilot®*3 noise compensation technology continuously adjusts the music to compensate for background noise and vehicle speed.
It reacts only to sustained noise sources and not intermittent ones, such as speed bumps.
An enhanced DSP algorithm allows faster and more effective compensation for unusual situations, such as driving on a very rough road or at high speeds.
In addition, a system is equipped which switches the audio to the optimum acoustics corresponding to the opening and closing of the soft top/roof.
The acoustic switching function is linked to the operation of the top lock lever/retractable hardtop switch and audio playback is muted for about 1 second while switching.
*3 AudioPilot® is a registered trademark of Bose Corporation.
Operating the Radio
DAB radio setting
-
Select the
icon while using DAB radio. -
Select the desired item and perform the setting.
The items which can be set are as follows:
|
Item |
Setting |
Function |
|---|---|---|
|
BAND Settings |
Band III/L Band/Both |
Frequency band can be changed. |
|
DAB-FM Link |
On/Off |
On: If the reception condition is bad, an FM station which is providing the same broadcast is searched and switched to. |
|
DAB-DAB Link |
On/Off |
On: If the reception condition is bad, a DAB station which is providing the same broadcast is searched and switched to. |
|
Radio Text |
On/Off |
On: Radio text is displayed. |
-
The radio text may not be displayed depending on the radio station.
-
The radio text cannot be displayed in DAB-FM mode.
-
If there is no DAB radio signal, “Signal Lost” is displayed on the screen. Change the ensemble or radio station, or perform station list updating.
Bluetooth® Preparation
Bluetooth® Hands-Free
Making a Call
For Mazda Connect, making calls is possible using any of the following 6 methods:
-
Phonebook downloaded from Bluetooth® device (mobile phone) (voice recognition function can be used)
-
Favourites
-
Call record
-
Dialing a telephone number (voice recognition function can be used)
-
“Redial” - Voice recognition command for making a call to the latest outgoing call record.
-
“Call back” - Voice recognition command for making a call to the latest incoming call record.
Phonebook Usage
Telephone calls can be made by saying the contact name in the downloaded phonebook or the name of a person whose phone number has been registered in the Bluetooth® Hands-Free. Refer to Import contact (Download Phonebook).
-
Press the talk button.
-
Wait for the beep sound.
-
Say: “Call XXXXX... (Ex. “John”) Mobile”. (You can also say, “Home”, “Work”, or “Other” instead of “Mobile”, depending on how you set up your contact information.)
-
Follow the voice guidance to make the call, or simple press the pick-up button on the steering switch during or after the guidance to make the call.
Screen operation
-
Select the
icon on the home screen to display the Communication screen. -
Select
to display the contact list. -
Select the contact you would like to call to display the details for the contact.
-
Select the desired phone number to make the call.
Import contact (Download Phonebook)
Phonebook data from your device (Mobile phone) can be sent and registered to your Bluetooth® Hands-Free phonebook using Bluetooth®.
(Automatic downloading)
The “Auto Download Contacts” setting must be on. When hands-free is connected to the device, the phonebook is downloaded automatically.
Refer to Communication Settings (Search).
(Manually downloading)
If the “Auto Download Contacts” setting is off, download the phonebook using the following procedure.
-
Select the
icon on the home screen to display the Communication screen. -
Select
to display the contact list. -
Select
. -
Select
or 
to switch to the device operation. -
If
is selected, select 
. -
Download will be started from the mobile phone.
-
If “Import All Contacts” is performed after saving the phonebook to the Bluetooth® unit, the phonebook will be overwritten.
-
A maximum of 1,000 contacts can be registered to the phonebook.
-
Phonebook, incoming/outgoing call record, and favourite memories are exclusive to each mobile phone to protect privacy.
Favourites Contacts
A maximum of 50 contacts can be registered. It will take less time to make a call after registering the telephone number. In addition, you do not have to look for the person you want to call in the phonebook.
Registering to your favourites
-
Select the
icon on the home screen to display the Communication screen. -
Select
to display the favourites list. -
Select
. -
Select
or 
. -
Select from the displayed list.
When “Add New Contact” is selected, information such as the selected person’s name is also registered. In addition, when “Add New Contact Details” is selected, only the telephone number of the selected person is registered.
Calling a favourite
-
Select the
icon on the home screen to display the Communication screen. -
Select
to display the favourites list. -
(If only one phone number is registered to contact)
Select the contact information you would like to call. Go to Step 5.
(If multiple phone numbers are registered to contact)
Select the contact you would like to call to display the screen indicating the details for the contact. Go to Step 4.
-
Select the phone number you would like to call.
-
Select
.
Deleting a favourite
-
Select the
icon on the home screen to display the Communication screen. -
Select
to display the favourites list. -
Select
. -
Select
. -
Select the contact information which you would like to delete.
-
Select
.
Changing the display order of your favourites list
-
Select the
icon on the home screen to display the Communication screen. -
Select
to display the favourites list. -
Select
. -
Select
. -
The contact can be moved after it is selected.
-
Slide the contact or move it using the commander switch, then select
.
Changing contact name of your favourites
-
Select the
icon on the home screen to display the Communication screen. -
Select
to display the favourites list. -
Select
. -
Select
. -
Select the contact to display the keyboard screen.
-
If a new name is input and
is selected, the contact name is stored.
If the contact is long-pressed when the favourites list is displayed, the contact information can be edited (deleted, moved).
Telephone Number Input
Practice this while parked until you are confident you can do it while driving in a non-taxing road situation. If you are not completely comfortable, make all calls from a safe parking position, and only start driving when you can devote your full attention to driving.
-
Select the
icon on the home screen to display the Communication screen. -
When
is pressed, the dial pad is displayed. -
Input the telephone number using the dial pad.
-
Select
to make the call.
Numeral or symbol entry
Use the dial pad.
Long-press the 
to input +.
Select 
to delete the currently input value.
Long-press to delete all input values.
Redial Function
Makes a call to the last person called (latest person on outgoing call record) from the mobile phone/vehicle.
-
Press the talk button.
-
Wait for the beep sound.
-
Say: “Redial”
Call back Function
Makes a call to the last person who called your (latest person on incoming call record) mobile phone/vehicle.
-
Press the talk button.
-
Wait for the beep sound.
-
Say: “Call back”
Communication Settings
Select the icon on the home screen to display the Communication screen.
Select 
to change the setting.
|
Item |
Setting |
Function |
|---|---|---|
|
Bluetooth® |
— |
Go to Bluetooth® setting menu. Refer to Bluetooth® Preparation (Search). |
|
Incoming Call Notifications |
On/Off |
Notifies when an incoming call is received. |
|
Auto Download SMS |
On/Off |
Downloads SMS automatically when the Bluetooth® unit is connected to the device. |
|
SMS Notifications |
On/Off |
Notifies when a new SMS is received. |
|
Auto Download Email*1 |
On/Off |
Downloads E-mail automatically when the Bluetooth® unit is connected to the device. |
|
Email Notifications |
On/Off |
Notifies when a new E-mail is received. |
|
Auto Download Call History |
On/Off |
Downloads Call History automatically when the Bluetooth® unit is connected to the device. |
|
Auto Download Contacts*1 |
On/Off |
Downloads the phonebook automatically when the Bluetooth® unit is connected to the device. |
|
Ringtone |
Fixed/In-band/Off |
The type of ring tone can be changed. Three selections are available including the standard ring tone set on the vehicle, the ring tone registered to your Bluetooth® device, or no ring tone. |
|
Phone Volume |
Adjusts using the slider. |
Adjusts the conversation volume. |
|
VR and Ringtone |
Adjusts using the slider. |
Adjusts the voice guidance and ringtone volume. |
|
Contacts Sort Order |
First Name, Last Name |
Displays the contact information in alphabetical order of the first name. |
|
Last Name, First Name |
Displays the contact information in alphabetical order of the last name. |
|
|
Preset Messages |
— |
Edits the preset message. Refer to Receiving and Replying to Messages (available only with E-mail/SMS compatible phones) (Search). |
|
Reset |
— |
Initializes all Communication Settings. |
-
Depending on the device, it may be necessary to acquire download permission on the device side.
Settings
Select the icon on the home screen and display the Settings screen.
Switch the tab and select the setting item you want to change.
You can customize settings in the setup display as follows:
|
Tab |
Item |
Function |
|
|---|---|---|---|
|
Display |
Refer to Volume/Display/Sound Controls (Search). |
||
|
Safety |
Blind Spot Monitoring System Other |
Refer to Personalisation Features (Search). |
|
|
Sound |
Refer to Volume/Display/Sound Controls (Search). |
||
|
Clock |
Adjust Time |
Displays the currently set time is displayed. Press AM/PM can only be selected with the 12-hour clock display. |
|
|
GPS Sync |
Synchronizes with GPS when turned on. When turned off, the time can be changed from “Adjust Time”. |
||
|
Time Format |
Changes the display between 12 and 24-hour clock time. |
||
|
Time Zone Select |
When it's not synchronized with GPS, select the region you want to specify. |
||
|
Daylight Savings Time |
Turns the daylight saving time setting on/off. When ON, the time advances 1 hour. When OFF, it returns to normal time. |
||
|
Vehicle |
Rain Sensing Wiper Door Locks Other |
Refer to Personalisation Features (Search). |
|
|
Devices |
Bluetooth |
Refer to Bluetooth® Preparation (Search). |
|
|
Network Management |
Wi-Fi™ is used to obtain Navi POI/Real Time Traffic function (Such as gas prices, weather, nearest restaurant) |
||
|
System |
Tool Tips |
Turns button explanations ON/OFF. |
|
|
Language |
Changes the language. |
||
|
Temperature |
Changes the setting between Fahrenheit and Celsius. |
||
|
Distance |
Changes the setting between miles and kilometres. |
||
|
Music Database Update |
Used to update Gracenote®. Gracenote® is used with USB Audio, and provides:
Gracenote® can be downloaded from the Mazda Handsfree Website. Refer to Gracenote® Database (Search). |
||
|
Factory Reset |
Memory and settings are initialized to the factory settings. The initialization launches by selecting the |
||
|
About |
Agreements and Disclaimers |
Verify the disclaimer and agree. |
|
|
Version Information |
Can verify the current audio unit OS version and Gracenote® Database version. |
||
