Cruise Control

Cruise Control (Some Models)

Cruise Control (Some Models)

With cruise control, you can set and automatically maintain any speed of more than about 25 km/h (16 mph).

 

Do not use the cruise control under the following conditions:

Using the cruise control under the following conditions is dangerous and could result in loss of vehicle control.

  • Hilly terrain

  • Steep inclines

  • Heavy or unsteady traffic

  • Slippery or winding roads

  • Similar restrictions that require inconsistent speed

Close Warning
View Warning

Cruise Control Switch

Cruise Main Indication, Cruise Set Indication/Cruise Set Indicator Light

Type A instrument cluster

(Cruise main indication (white))

The indication turns on (white) when the cruise control system is activated.

(Cruise set indication (green))

The indication turns on (green) when a cruising speed has been set.

 

Type B instrument cluster

(Cruise main indication (white))

The indication turns on (white) when the cruise control system is activated.

(Cruise set indication (white)/indicator light (green))

The cruise set indication (white) is displayed in the instrument cluster and the cruise set indicator light (green) turns on when a cruising speed has been set.

Activation/Deactivation

 

Always turn off the cruise control system when it is not in use:

Leaving the cruise control system in an activation-ready state while the cruise control is not in use is dangerous as the cruise control could unexpectedly activate if the activation button is accidentally pressed, and result in loss of vehicle control and an accident.

Close Warning
View Warning

 

When the ignition is switched off, the system status before it was turned off is maintained. For example, if the ignition is switched off while the cruise control is operating, the system will be operable when the ignition is switched ON the next time.

Close Note
View Note

Activation

With Adjustable Speed Limiter (ASL)

To activate the system, press the MODE switch. The cruise main indication (white) turns on.

 

When the Adjustable Speed Limiter (ASL) is operating after pressing the MODE switch, press the MODE switch again to switch to the cruise control.

Close Note
View Note

Without Adjustable Speed Limiter (ASL)

To activate the system, press the ON switch. The cruise main indication (white) turns on.

Deactivation

With Adjustable Speed Limiter (ASL)

To deactivate the system, press the OFF/CANCEL switch. The cruise main indication (white) turns off.

 

When the MODE switch is pressed during cruise control system operation, the system switches to the Adjustable Speed Limiter (ASL).

Close Note
View Note

Without Adjustable Speed Limiter (ASL)

To deactivate the system, press the OFF/CANCEL switch. The cruise main indication (white) turns off.

To Set Speed

  1. (With Adjustable Speed Limiter (ASL))

    Activate the cruise control system by pressing the MODE switch. The cruise main indication (white) turns on.

    (Without Adjustable Speed Limiter (ASL))

    Activate the cruise control system by pressing the ON switch. The cruise main indication (white) turns on.

  2. Accelerate to the desired speed, which must be more than 25 km/h (16 mph).

  3. Type A instrument cluster

    Set the cruise control by pressing the SET/ switch at the desired speed. The cruise control is set at the moment the SET/ switch is pressed. Release the accelerator pedal simultaneously. The cruise set indication (green) turns on.

    Type B instrument cluster

    Set the cruise control by pressing the SET/ switch at the desired speed. The cruise control is set at the moment the SET/ switch is pressed. Release the accelerator pedal simultaneously. The cruise set indication (white) is displayed and the cruise set indicator light (green) turns on.

 

  • The cruise control speed setting cannot be performed under the following conditions:

    • (Automatic transmission)

      The selector lever is in the P or N position.

    • (Manual transmission)

      The shift lever is in the neutral position.

    • The parking brake is applied.

    • (Vehicles with Adjustable Speed Limiter (ASL))

      The MODE switch for the Adjustable Speed Limiter (ASL) is pressed.

  • Release the SET/ or RESUME/ switch at the desired speed, otherwise the speed will continue increasing while the RESUME/ switch is pressed and held, and continue decreasing while the SET/ switch is pressed and held (except when the accelerator pedal is depressed).

  • On a steep grade, the vehicle may momentarily slow down while ascending, or speed up while descending.

  • The cruise control will cancel if the vehicle speed decreases below 21 km/h (13 mph) when climbing a steep grade.

  • The cruise control may cancel at about 15 km/h (9 mph) below the preset speed such as when climbing a long, steep grade.

Close Note
View Note

The vehicle speed preset using the cruise control is displayed in the instrument cluster.

To Increase Cruising Speed

Follow either of these procedures.

To increase speed using cruise control switch

Press the RESUME/ switch and hold it. Your vehicle will accelerate. Release the switch at the desired speed.

 

Press the RESUME/ switch and release it immediately to adjust the preset speed. Multiple operations will increase the preset speed according to the number of times it is operated.

Increasing speed with a single RESUME/ switch operation

Instrument cluster display for vehicle speed indicated in km/h: 1 km/h (0.6 mph)

Instrument cluster display for vehicle speed indicated in mph: 1 mph (1.6 km/h)

To increase speed using accelerator pedal

Depress the accelerator pedal to accelerate to the desired speed. Press the SET/ switch and release it immediately.

 

Accelerate if you want to speed up temporarily when the cruise control is on. Greater speed will not interfere with or change the set speed. Take your foot off the accelerator to return to the set speed.

Close Note
View Note

To Decrease Cruising Speed

Press the SET/ switch and hold it. The vehicle will gradually slow.

Release the switch at the desired speed.

 

Press the SET/ switch and release it immediately to adjust the preset speed. Multiple operations will decrease the preset speed according to the number of times it is operated.

Decreasing speed with a single SET/ switch operation

Instrument cluster display for vehicle speed indicated in km/h: 1 km/h (0.6 mph)

Instrument cluster display for vehicle speed indicated in mph: 1 mph (1.6 km/h)

To Resume Cruising Speed at More Than 25 km/h (16 mph)

If the cruise control system temporarily cancelled (such as by applying the brake pedal) and the system is still activated, the most recent set speed will automatically resume when the RESUME/ switch is pressed.

If vehicle speed is below 25 km/h (16 mph), increase the vehicle speed up to 25 km/h (16 mph) or more and press the RESUME/ switch.

To Temporarily Cancel

To temporarily cancel the system, use one of these methods:

  • Slightly depress the brake pedal.

  • (Manual transmission)

    Depress the clutch pedal.

  • Press the OFF/CANCEL switch.

If the RESUME/ switch is pressed when the vehicle speed is 25 km/h (16 mph) or higher, the system reverts to the previously set speed.

 

  • If any of the following conditions occur, the cruise control system is temporarily cancelled.

    • The parking brake is applied.

    • (Vehicles with Adjustable Speed Limiter (ASL))

      The MODE switch for the Adjustable Speed Limiter (ASL) is pressed.

    • (Automatic transmission)

      The selector lever is in the P, N, or R position.

    • (Manual transmission)

      The shift lever is in the neutral position.

  • When the cruise control system is temporarily cancelled by even one of the applicable cancel conditions, the speed cannot be re-set.

  • (Automatic transmission)

    The cruise control cannot be cancelled while driving in manual mode (selector lever shifted from D to M position). Therefore, engine braking will not be applied even if the transmission is shifted down to a lower gear. If deceleration is required, lower the set speed or depress the brake pedal.

Close Note
View Note

To Deactivate

Type A instrument cluster

When a cruising speed has been set (cruise set cruise set indication (green) turns on)

Long-press the OFF/CANCEL switch or press the OFF/CANCEL switch 2 times.

When a cruising speed has not been set (cruise main indication (white) turns on)

Press the OFF/CANCEL switch.

Type B instrument cluster

When a cruising speed has been set (cruise set indication (white) is displayed/cruise set indicator light (green) turns on)

Long-press the OFF/CANCEL switch or press the OFF/CANCEL switch 2 times.

When a cruising speed has not been set (cruise main indication (white) turns on)

Press the OFF/CANCEL switch.

Page top