Vehicle Status Monitor

Select “Information” on the Home screen to display the vehicle status monitor.
Select “Vehicle Status Monitor”.

You can customize settings in the setup display as follows:

Item		Explanation
Vehicle Warning Messages		If there is a problem with the vehicle, information about the problem is displayed.
Next Service		The next maintenance period is displayed. Date The date manually set by the customer is displayed. Distance If “Next Service Date” is set to “Automatic” The “Distance Until Oil Change” content is displayed. If “Next Service Date” is set to “Manual” The travelled distance manually set by the customer is displayed. However, when any of the following conditions is met, the “Distance Until Oil Change” content is displayed. You have not set the travelled distance. “Distance Until Oil Change” is shorter than the travelled distance set by the customer.
Maintenance Details	Engine Oil Level	The engine oil level is displayed.
	Distance Until Oil Change	The travelled distance until engine oil needs to be replaced is displayed.
	Next Service	The next maintenance period manually set by the customer is displayed.
	Tyre pressure monitor	The current tyre pressure can be checked. When tyre pressures were last modified Air pressure of each tyre Tyre pressure condition of each tyre When air pressure is low: Yellow color When air pressure is correct: Blue color When air pressure cannot be monitored: Black color Tyre pressure units While the tyre pressure monitoring system is learning the tyre positions, such as immediately after a tyre position has been changed, the tyre pressure at the tyre position prior to it being changed is displayed until the system completes the learning. For this reason, the tyre pressures displayed for the tyre positions may be different from the actual tyre pressures at the tyre positions. The air pressure displayed on the display may be different from the value measured using an air pressure gauge. The display units for the tyre pressures can be changed. Refer to Settings (Search). Close Note View Note
Vehicle Maintenance Settings	Next Service Date	The method of setting the next maintenance can be selected from the following. Automatic Manual
	Set Next Service Date	If “Next Service Date” is set to “Manual”, the next maintenance date can be set.
	Set Next Service Distance	If “Next Service Date” is set to “Manual”, the travelled distance until the next maintenance period can be set.
	Reset Oil Change Distance	The “Distance Until Oil Change” content can be reset. After replacing the engine oil, perform the reset (engine oil data resetting) of the recorded value in this item.