Active Driving Display (Some Models)

Always adjust the display brightness and position with the vehicle stopped:

Adjusting the display brightness and position while driving the vehicle is dangerous as doing so could distract your attention from the road ahead and lead to an accident.

Close Warning

View Warning

Do not try to adjust the angle or open/close the active driving display manually. Fingerprints on the display will make it difficult to view and using excessive force when operating it could cause damage.
Do not place objects in the vicinity of the active driving display. The active driving display may not operate or any interference with its operation could cause damage.
Do not place beverages near the active driving display. If water or other liquids are splashed on the active driving display, it could cause damage.
Do not place objects above the active driving display screen or apply stickers to the combiner as they will cause interference.
A sensor is integrated to control the display's luminosity. If the optical receiver is covered, the display's luminosity will lower making the display difficult to view.
Do not allow intense light to hit the optical receiver. Otherwise, it could cause damage.

Close Caution

View Caution

It may be difficult to view the display when wearing sunglasses. Take off your sunglasses or adjust the luminosity.
If the battery has been removed and re-installed or the battery voltage is low, the adjusted position may deviate.
The display may be difficult to view or temporarily affected by weather conditions such as rain, snow, light, and temperature.
If the audio system is removed, the active driving display cannot be operated.

Close Note

View Note

The active driving display indicates the following information:

Mazda Radar Cruise Control (MRCC) Operation Conditions and Warnings

Refer to Mazda Radar Cruise Control (MRCC) (Search).
Lane Departure Warning System (LDWS) Operation Conditions and Warnings

Refer to Lane Departure Warning System (LDWS) (Search).
Smart City Brake Support (SCBS) Operation Conditions

Refer to Smart City Brake Support (SCBS) (Search).
Smart Brake Support (SBS) Operation Conditions and Warnings

Refer to Smart Brake Support (SBS) (Search).
Distance Recognition Support System (DRSS) Operation Conditions and Warnings

Refer to Distance Recognition Support System (DRSS) (Search).
Adjustable Speed Limiter Operation Conditions and Warnings

Refer to Adjustable Speed Limiter (Search).
Vehicle Speed Setting Using Cruise Control

Refer to Cruise Control (Search).
Turn-by-Turn (TBT) (Direction and Distance) and Lane Guidance
Vehicle Speed

Each setting/adjustment for the active driving display can be performed on the centre display (Type C/Type D audio).

Select the icon on the home screen and display the Settings screen.
Select the AD-Disp tab.
Select the desired item and perform the setting/adjustment.
- Height : Active driving display position
- Brightness Control : Method for adjusting screen brightness (Automatically/Manually)
- Calibration : Brightness initialization setting (when selecting automatic adjustment)
- Brightness : Brightness adjustment (when selecting manual adjustment)
- Navigation : On/Off
- Active Driving Display : On/Off
- Reset