The ignition must be switched ON to use the turn and lane-change signals.
Move the lever halfway toward the direction of the lane change―until the indicator flashes― and hold it there. It will return to the off position when released.
After releasing the direction indicator lever, the direction indicator flashes three times. The operation can be cancelled by moving the lever in the direction opposite to which it was operated.
The three-flash turn signal function can be switched to operable/inoperable using the personalisation function.
Refer to Personalisation Features (Search).
The ignition must be switched ON to use the wiper.
Turn the wiper on by turning the rear wiper/washer switch.
Switch Position |
Wiper operation |
||
---|---|---|---|
No. |
Type A |
Type B |
|
![]() |
Stop |
||
![]() |
![]() |
![]() |
Intermittent |
![]() |
![]() |
![]() |
Normal |
To spray washer fluid, turn the rear wiper/washer switch to either of the position. After the switch is released, the washer will stop.
If the washer does not work, inspect the fluid level (Search). If the fluid level is normal and the washer still does not work, consult an expert repairer, we recommend an Authorised Mazda Repairer.