Ignition Switch
Starting the Engine
Turning the Engine Off
i-stop (Some Models)

Turning the Engine Off

 


Do not stop the engine while the vehicle is moving:

Stopping the engine while the vehicle is moving for any reason other than in an emergency is dangerous. Stopping the engine while the vehicle is moving will result in reduced braking ability due to the loss of power braking, which could cause an accident and serious injury.

Close Warning
View Warning
  1. Stop the vehicle completely.

  2. (Manual transaxle)

    Shift into neutral and set the parking brake.

    (Automatic transaxle)

    Shift the selector lever to the P position and set the parking brake.

  3. Press the push button start to turn off the engine. The ignition position is off.

 


When leaving the vehicle, make sure the push button start is off.

Close Caution
View Caution

 


  • (SKYACTIV-G 1.5, MZR 1.6 (Some Models), SKYACTIV-G 2.0, SKYACTIV-G 2.5)

    The cooling fan in the engine compartment could turn on for a few minutes after the ignition is switched from ON to OFF, whether or not the A/C is on or off, to cool the engine compartment quickly.

  • When the push button start is pressed from ON to ACC or OFF, the KEY indicator light (green) may flash for approximately 30 seconds indicating that the remaining battery power of the key is low.

    Replace with a new battery before the key becomes unusable.

    Refer to Key Battery Replacement (Search).

  • (Automatic transaxle)

    If the engine is turned off while the selector lever is in a position other than P, the ignition switches to ACC.

Close Note
View Note