When DrivingInstrument Cluster and DisplayActive Driving Display (Some Models)

Active Driving Display (Some Models)

 

Always adjust the display brightness and position with the vehicle stopped:

Adjusting the display brightness and position while driving the vehicle is dangerous as doing so could distract your attention from the road ahead and lead to an accident.

Close Warning

 

  • Do not try to adjust the angle or open/close the active driving display manually. Fingerprints on the display will make it difficult to view and using excessive force when operating it could cause damage.

  • Do not place objects in the vicinity of the active driving display. The active driving display may not operate or any interference with its operation could cause damage.

  • Do not place beverages near the active driving display. If water or other liquids are splashed on the active driving display, it could cause damage.

  • Do not place objects above the active driving display screen or apply stickers to the combiner as they will cause interference.

  • A sensor is integrated to control the display's luminosity. If the optical receiver is covered, the display's luminosity will lower making the display difficult to view.

  • Do not allow intense light to hit the optical receiver. Otherwise, it could cause damage.

Close Caution

 

  • It may be difficult to view the display when wearing sunglasses. Take off your sunglasses or adjust the luminosity.

  • If the battery has been removed and re-installed or the battery voltage is low, the adjusted position may deviate.

  • The display may be difficult to view or temporarily affected by weather conditions such as rain, snow, light, and temperature.

  • If the audio system is removed, the active driving display cannot be operated.

Close Note

The active driving display indicates the following information:

  • Mazda Radar Cruise Control (MRCC) Operation Conditions and Warnings

    Refer to Mazda Radar Cruise Control (MRCC) (Search).

  • Lane-keep Assist System Operation Conditions and Warnings

    Refer to Lane-keep Assist System (Search).

  • Adjustable Speed Limiter Operation Conditions

    Refer to Adjustable Speed Limiter (Search).

  • Lane Departure Warning System (LDWS) Operation Conditions and Warnings

    Refer to Lane Departure Warning System (LDWS) (Search).

  • Smart Brake Support (SBS) Warnings

    Refer to Smart Brake Support (SBS) (Search).

  • Smart City Brake Support (SCBS) Operation Conditions

    Refer to Smart City Brake Support [Forward] (SCBS F) (Search).

  • Distance Recognition Support System (DRSS) Operation Conditions and Warnings

    Refer to Distance Recognition Support System (DRSS) (Search).

  • Vehicle Speed Setting Using Cruise Control

    Refer to Cruise Control (Search).

  • Turn-by-Turn (TBT) (Direction and Distance) and Lane Guidance

  • Vehicle Speed

Each setting/adjustment for the active driving display can be performed on the centre display (Type C/Type D audio).

  1. Select the icon on the home screen and display the Settings screen.

  2. Select the AD-Disp tab.

  3. Select the desired item and perform the setting/adjustment.

    • Height: Active driving display position

    • Brightness Control: Method for adjusting screen brightness (Automatically/Manually)

    • Calibration: Brightness initialization setting (when selecting automatic adjustment)

    • Brightness: Brightness adjustment (when selecting manual adjustment)

    • Navigation: On/Off

    • Active Driving Display: On/Off

    • Reset