(Display example)
Displays as follows:
Indication in display and master warning light in instrument cluster are illuminated at same time
This indicates a malfunction with the vehicle system. Check the message indicated in the display and consult an expert repairer, we recommend an Authorised Mazda Repairer. For details, refer to the explanations for the warning/indicator lights, in the warning/indicator lights section, which match the symbol in the upper part of the display. If a message is not indicated in the display, operate the INFO switch to display the “Warning” screen.
Multi-information display
A message such as the system operation status, a malfunction, or an abnormality is indicated.
(When a symbol and message are indicated in the display)
For details on the symbols indicated in the upper part of the screen, check the indication and method for taking action list.
(When only a message is indicated in the display)
Follow the instructions indicated in the display.
If any of the content in the following illustrations is indicated, there may be a problem with the vehicle. The method for taking action differs depending on the indication.
Check the following illustrations below.
Action: Park the vehicle immediately, view the symbol indicated in the upper part of the screen and then refer to the “Indication and method for taking action list” containing the symbol to see what action should be taken.
Indication on display |
|
---|---|
Action: Consult an Authorised Mazda Repairer to have your vehicle inspected. View the symbol indicated in the upper part of the screen and refer to the “Indication and method for taking action list” containing the symbol to see what action should be taken.
Indication on display |
||
---|---|---|
Action: Consult an Authorised Mazda Repairer to have your vehicle inspected.
Indication on display |
|||
---|---|---|---|
Indication and method for taking action list
Signal |
Warning/Indicator Lights |
Page |
---|---|---|
Master Warning Light |
(Search) | |
Brake System Warning Light |
(Search) | |
ABS Warning Light |
(Search) | |
Electric Parking Brake Indicator Light |
(Search) | |
Electric Parking Brake Warning Light |
(Search) | |
Charging System Warning Indication/Warning Light |
(Search) | |
Engine Oil Warning Light |
(Search) | |
Check Engine Light |
(Search) | |
High Engine Coolant Temperature Warning Light (Red) |
(Search) | |
i-stop Warning Light (Amber)/Indicator Light (Green) |
(Search) | |
Lane-keep Assist System Indication |
(Search) | |
Lane-keep Assist System OFF Indication |
(Search) | |
Lane Departure Warning System (LDWS) Indication |
(Search) | |
Lane Departure Warning System (LDWS) OFF Indication |
(Search) | |
Automatic Transaxle Warning Indication |
(Search) | |
Power Steering Malfunction Indication |
(Search) | |
Air Bag/Front Seat Belt Pretensioner System Warning Light |
(Search) | |
Low Fuel Warning Light |
(Search) | |
Seat Belt Warning Light |
(Search) | |
Door-Ajar Warning Indication |
(Search) | |
Boot lid/Liftgate-Ajar Warning Indication |
(Search) | |
Vehicle Speed Warning Indication |
(Search) | |
Low Washer Fluid Level Warning Indication |
(Search) | |
KEY Indication |
(Search) | |
Adaptive LED Headlights Warning Light (Amber)/Indicator Light (Green) |
(Search) | |
High Beam Control System (HBC) Warning Light (Amber)/Indicator Light (Green) |
(Search) | |
Glow Indicator Light |
(Search) | |
Diesel Particulate Filter Indication |
(Search) | |
Wrench Indication |
(Search) | |
TCS/DSC Indicator Light |
(Search) | |
DSC OFF Indicator Light |
(Search) | |
Smart Brake Support/Smart City Brake Support (SBS/SCBS) OFF Indicator Light |
(Search) | |
Smart City Brake Support (SCBS) Warning Indication |
(Search) | |
i-ELOOP Indication |
(Search) | |
Low Engine Coolant Temperature Indicator Light (Blue) |
(Search) | |
Shift Position Indication |
(Search) | |
Headlight High-Beam Indicator Light |
(Search) | |
Direction Indicator/Hazard Warning Indicator Lights |
(Search) | |
Security Indicator Light |
(Search) | |
Mazda Radar Cruise Control (MRCC) Warning Light (Amber)/Indicator Light (Green) |
(Search) | |
Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green) |
(Search) | |
Select Mode Indication |
(Search) | |
Blind Spot Monitoring (BSM) OFF Indication |
(Search) | |
Lights-On Indicator Light |
(Search) | |
LED Headlight Warning Light |
(Search) | |
Fog Light Indicator Light |
(Search) |
Signal |
Warning/Indicator Lights |
Page |
---|---|---|
Master Warning Light |
(Search) | |
Brake System Warning Light |
(Search) | |
ABS Warning Light |
(Search) | |
Electric Parking Brake Indicator Light |
(Search) | |
Electric Parking Brake Warning Light |
(Search) | |
Brake Pedal Operation Demand Indicator Light |
(Search) | |
Charging System Warning Light |
(Search) | |
Engine Oil Warning Light |
(Search) | |
Check Engine Light |
(Search) | |
High Engine Coolant Temperature Warning Light (Red) |
(Search) | |
i-stop Warning Light (Amber)/Indicator Light (Green) |
(Search) | |
Lane Departure Warning System (LDWS) Warning Light |
(Search) | |
Lane Departure Warning System (LDWS) OFF Indicator Light |
(Search) | |
Automatic Transaxle Warning Light |
(Search) | |
Power Steering Malfunction Indicator Light |
(Search) | |
Air Bag/Front Seat Belt Pretensioner System Warning Light |
(Search) | |
Low Fuel Warning Light |
(Search) | |
Seat Belt Warning Light |
(Search) | |
Door-Ajar Warning Light |
(Search) | |
Vehicle Speed Warning Indication |
(Search) | |
Low Washer Fluid Level Warning Light |
(Search) | |
KEY Warning Light (Red)/Indicator Light (Green) |
(Search) | |
High Beam Control System (HBC) Warning Light (Amber)/Indicator Light (Green) |
(Search) | |
Glow Indicator Light |
(Search) | |
Diesel Particulate Filter Indicator Light |
(Search) | |
Wrench Indicator Light |
(Search) | |
TCS/DSC Indicator Light |
(Search) | |
DSC OFF Indicator Light |
(Search) | |
Low Engine Coolant Temperature Indicator Light (Blue) |
(Search) | |
Shift Position Indication |
(Search) | |
Headlight High-Beam Indicator Light |
(Search) | |
Direction Indicator/Hazard Warning Indicator Lights |
(Search) | |
Security Indicator Light |
(Search) | |
Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green) |
(Search) | |
Select Mode Indication |
(Search) | |
Blind Spot Monitoring (BSM) OFF Indicator Light |
(Search) | |
Lights-On Indicator Light |
(Search) | |
LED Headlight Warning Light |
(Search) | |
Fog Light Indicator Light |
(Search) |
This warning light stays on for a few seconds when the ignition is switched ON.
Type A
Displays when notification of the system malfunctions is required.
Check the message indicated in the display and consult an expert repairer, we recommend an Authorised Mazda Repairer.
Type B
The light illuminates continuously if any one of the following occurs. Consult an expert repairer, we recommend an Authorised Mazda Repairer.
There is a malfunction in the battery management system.
There is a malfunction in the brake switch.
(SKYACTIV-D 2.2)
There is a malfunction in the engine's hydraulic control.
There is a malfunction in the engine's timing chain.
There is a malfunction in the blow-by heater.
This warning has the following functions:
This warning light illuminates when the ignition is switched ON and turns off when the engine is started.
The light turns on continuously if any one of the following occurs:
Insufficient brake fluid
Brake system is malfunctioning
If the brake warning light remains illuminated the brake fluid may be low or there could be a problem with the brake system. Park the vehicle in a safe place immediately and contact an expert repairer, we recommend an Authorised Mazda Repairer.
Do not drive with the brake system warning light illuminated. Contact an expert repairer, we recommend an Authorised Mazda Repairer to have the brakes inspected as soon as possible:
Driving with the brake system warning light illuminated is dangerous. It indicates that your brakes may not work at all or that they could completely fail at any time. If this light remains illuminated, after checking that the parking brake is fully released, have the brakes inspected immediately.
In addition, the effectiveness of the braking may diminish so you may need to depress the brake pedal more strongly than normal to stop the vehicle.
The warning light stays on for a few seconds when the ignition is switched ON.
If the ABS warning light stays on while you're driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS.
Should this happen, consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.
When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS warning light may illuminate. If this occurs, it is the result of the weak battery and does not indicate an ABS malfunction.
Recharge the battery.
Refer to Battery Recharging (Search).
The brake assist system does not operate while the ABS warning light is illuminated.
If the electronic brake force distribution control unit determines that some components are operating incorrectly, the control unit may illuminate the brake system warning light and the ABS warning light simultaneously. The problem is likely to be the electronic brake force distribution system.
Do not drive with both the ABS warning light and brake warning light illuminated. Have the vehicle towed to an expert repairer, we recommend an Authorised Mazda Repairer to have the brakes inspected as soon as possible:
Driving when the brake system warning light and ABS warning light are illuminated simultaneously is dangerous.
When both lights are illuminated, the rear wheels could lock more quickly in an emergency stop than under normal circumstances.
This indicator light stays on for a few seconds when the ignition is switched ON.
The light turns on when the electric parking brake is applied and the light turns off when the brake is released.
If the light remains turned on even if the electric parking brake switch is released, an expert repairer, we recommend an Authorised Mazda Repairer.
When the light is flashing
The light flashes if the electric parking brake has a malfunction. If the light remains flashing even if the electric parking brake switch is operated, consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.
This warning light stays on for a few seconds when the ignition is switched ON.
The warning light illuminates when the system has a malfunction. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
This indicator light stays on for a few seconds when the ignition is switched ON.
The light turns on when the electric parking brake is released using the electric parking brake switch without depressing the brake pedal.
This warning light illuminates when the ignition is switched ON and turns off when the engine is started.
If the warning light/indication illuminates while driving, it indicates a malfunction of the alternator or of the charging system.
Drive to the side of the road and park off the right-of-way. Consult an expert repairer, we recommend an Authorised Mazda Repairer.
Do not continue driving when the charging system warning light is illuminated because the engine could stop unexpectedly.
The warning light stays on for a few seconds when the ignition is switched ON.
This warning light indicates low engine oil pressure.
For SKYACTIV-D 2.2, the engine oil warning light also illuminates if the engine oil is extremely deteriorated.
Do not run the engine if the oil pressure is low. Otherwise, it could result in extensive engine damage.
If the light illuminates while driving:
Drive to the side of the road and park off the right-of-way on level ground.
Turn off the engine and wait 5 minutes for the oil to drain back into the sump.
Inspect the engine oil level (Search). If it's low, add the appropriate amount of engine oil while being careful not to overfill.
Do not run the engine if the oil level is low. Otherwise, it could result in extensive engine damage.
Start the engine and check the warning light.
If the light remains illuminated even though the oil level is normal or after adding oil, stop the engine immediately and have your vehicle towed to an expert repairer, we recommend an Authorised Mazda Repairer.
This indicator light illuminates when the ignition is switched ON and turns off when the engine is started.
If this light illuminates while driving, the vehicle may have a problem. It is important to note the driving conditions when the light illuminated and consult an expert repairer, we recommend an Authorised Mazda Repairer.
The check engine light may illuminate in the following cases:
(SKYACTIV-G 2.0, SKYACTIV-G 2.5)
The fuel tank level being very low or approaching empty.
The engine's electrical system has a problem.
The emission control system has a problem.
If the check engine light remains on, or it flashes continuously (SKYACTIV-G 2.0, SKYACTIV-G 2.5), do not drive at high speeds and consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.
When the ignition is switched ON, the light illuminates momentarily and then turns off.
The light flashes when the engine coolant temperature is extremely high, and illuminates when the engine coolant temperature increases further.
Handling Procedure
Flashing light
Drive slowly to reduce engine load until you can find a safe place to stop the vehicle and wait for the engine to cool down.
Illuminated light
This indicates the possibility of overheating. Park the vehicle in a safe place immediately and stop the engine.
Refer to Overheating (Search).
Do not drive the vehicle with the high engine coolant temperature warning light illuminated. Otherwise, it could result in damage to the engine.
To ensure safe and comfortable use of the vehicle, the i-stop system constantly monitors the driver's operations, the vehicle's interior and exterior environment, and the operational status of the vehicle, and uses the i-stop warning light (amber) and i-stop indicator light (green) to inform the driver of various cautions and warnings.
On vehicles equipped with the centre display, the i-stop operation status is displayed in the fuel monitor control status display.
Refer to Control Status Display (Search).
i-stop warning light (amber)
When illuminated
The light turns on when the ignition is switched ON and turns off when the engine is started.
The light turns on when the i-stop OFF switch is pressed and the system is turned off.
The light turns on if the following operations are performed while engine idling is stopped. In such cases, the engine does not restart automatically to ensure safety. Start the engine using the normal method.
The bonnet is opened.
With the selector lever in the D or M (not in second gear fixed mode) position, the driver's seat belt is unfastened and the driver's door is opened.
A problem in the system may be indicated under the following conditions. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
The light does not turn on when the ignition is switched ON.
The light continues to remain on even though the i-stop OFF switch has been pressed while the engine is running.
When flashing
The light continues to flash if the system has a malfunction. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
i-stop indicator light (green)
When illuminated
The light turns on while engine idling is stopped and turns off when the engine is restarted.
The light turns on when the engine idling stop conditions are met while the vehicle is driven.
When flashing
The light flashes if the vehicle is stopped but the brake pedal is not depressed with sufficient force. Depress the brake pedal a little more strongly because the pedal force may be insufficient.
While the system is on stand-by, drive the vehicle in the centre of the vehicle lane. When all of the following conditions are met, the lane-keep assist system display is indicated in the multi-information display and the system becomes operational.
The lane-keep assist system display (stand-by status) is indicated in the multi-information display, and the system goes on stand-by.
When the steering operation assist setting has been has been set to non-operational, the lane-keep assist display is not indicated.
When the Lane Departure Warning System (LDWS) is turned on the LDWS indication is displayed.
This warning light illuminates for a few seconds when the ignition is switched ON.
The indicator flashes when the system determines that the vehicle may be deviating from its lane.
Press the lane-keep assist system switch to cancel the lane-keep assist system . The lane-keep assist system OFF indication is displayed.
If the indication remains displayed even though the lane-keep assist system switch has been operated, it indicates a problem in the system. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
Always use tyres for all wheels that are of the specified size, and the same manufacture, brand, and tread pattern. In addition, do not use tyres with significantly different wear patterns on the same vehicle. If such improper tyres are used, the lane-keep assist system may not operate normally.
Type A
Press the LDWS switch to cancel the LDWS. The LDWS OFF indication is displayed.
If the indication remains displayed even though the LDWS switch has been operated, it indicates a problem in the system. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
Type B
This indicator light illuminates for a few seconds when the ignition is switched ON.
A problem in the system may be indicated under the following conditions. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
The light does not turn on when the ignition is switched ON.
It remains illuminated even though the LDWS switch has been switched off.
Always use tyres for all wheels that are of the specified size, and the same manufacture, brand, and tread pattern. In addition, do not use tyres with significantly different wear patterns on the same vehicle. If such improper tyres are used, the LDWS may not operate normally.
When an emergency spare tyre is used, the system may not operate normally.
Type B
This warning light stays on for a few seconds when the ignition is switched ON.
Type A/Type B
The light/indication illuminates when the transaxle has a problem.
If the automatic transaxle warning light/warning indication illuminates, the transaxle has an electrical problem. Continuing to drive your Mazda in this condition could cause damage to your transaxle. Consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.
Type B
This indicator light illuminates when the ignition is switched ON, and turns off when the engine is started.
Type A/Type B
The power steering malfunction indicator light/warning indication illuminates if there is a malfunction with the power steering while the engine is running.
If the indicator light/warning indication illuminates, park the vehicle in a safe place immediately and stop the engine.
If the indicator light/warning indication does not turn off even if the engine is restarted afterwards, consult an expert repairer, we recommend an Authorised Mazda Repairer.
If the indicator light/warning indication illuminates, the power steering will not operate normally. If this happens, the steering wheel can still be operated, however, the operation may feel heavy compared to normal, and the steering wheel could vibrate when turning.
Repeatedly jerking the steering wheel left and right while the vehicle is stopped or moving extremely slowly will cause the power steering system to go into protective mode which will make the steering feel heavy, but this does not indicate a problem. If this occurs, park the vehicle safely and wait several minutes for the system to return to normal.
If the air bag/front seat belt pretensioner system is working properly, the warning light illuminates when the ignition is switched ON or after the engine is cranked. The warning light turns off after a specified period of time.
A system malfunction is indicated if the warning light constantly flashes, constantly illuminates or does not illuminate at all when the ignition is switched ON. If any of these occur, consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible. The system may not operate in an accident.
Never tamper with the air bag/pretensioner systems and always have an expert repairer, we recommend an Authorised Mazda Repairer perform all servicing and repairs:
Self-servicing or tampering with the systems is dangerous. An air bag/pretensioner could accidentally activate or become disabled causing serious injury or death.
This warning light signals that the fuel tank will soon be empty.
Refuel as soon as possible.
Driver's seat
Front passenger's seat
The seat belt warning light illuminates if the driver or front passenger's seat is occupied and the seat belt is not fastened with the ignition switched ON.
Seat belt reminder
Front seat
If the vehicle is driven with the driver or front passenger's seat belt unfastened, the seat belt warning light illuminates and a warning beep sounds.
If the driver or front passenger's seat belt is unfastened (only when the front passenger seat is occupied) and the vehicle is driven at a speed faster than about 20 km/h (12 mph), the warning light will flash and a beep sound will be heard. After a short time, the warning light stops flashing, but remains illuminated, and the beep sound stops. If a seat belt remains unfastened, the warning light flashes and the beep sound activates again for a given period of time.
Until a seat belt is fastened or a given period of time has elapsed, the beep sound will not stop even if the vehicle speed falls below 20 km/h (12 mph).
If a driver or front passenger's seat belt is unfastened after the beep sound turns off (warning light remains illuminated), and the vehicle speed exceeds 20 km/h (12 mph), the warning light flashes and beep sound activates again.
Placing heavy items on the front passenger seat may cause the front passenger seat belt warning function to operate depending on the weight of the item.
To allow the front passenger seat weight sensor to function properly, do not place and sit on an additional seat cushion on the front passenger seat. The sensor may not function properly because the additional seat cushion could cause sensor interference.
When a small child sits on the front passenger seat, it is possible that the warning light will not operate.
Rear seat
If the rear seat belts are not fastened while the ignition is switched ON, the driver and the passenger will be informed by the warning lights.
The warning lights illuminate in two colours. When the seat belt is not fastened, the warning light illumination is red. When the seat belt is fastened, the illumination is green. The warning lights operate even when there is no passenger on the rear seat. The warning beep only sounds if a seat belt is unfastened after being fastened.
If the rear seat belts are not fastened in a specified period of time after the engine has been started, all the warning lights turn off.
Type A
This warning indication illuminates when any door is not securely closed.
Close the door securely before driving the vehicle.
Type B
This warning light illuminates when any door, the boot lid or liftgate is not securely closed.
Close the door, the boot lid or liftgate securely before driving the vehicle.
This warning indication is illuminated when the boot lid or liftgate is not securely closed.
Close the boot lid or liftgate securely before driving the vehicle.
Type A/Type B
This warning light/warning indication indicates that little washer fluid remains. Add fluid (Search).
Type A
“Keyless System malfunction”is displayed
This message is displayed if the advanced keyless entry & push button start system has a problem.
Contact an expert repairer, we recommend an Authorised Mazda Repairer.
If the above message is indicated, or the push button start indicator light (amber) flashes, the engine may not start. If the engine cannot be started, try starting it using the emergency operation for starting the engine, and have the vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.
Refer to Emergency Operation for Starting the Engine (Search).
“Set Power to OFF” is displayed
This message is displayed when the driver's door is opened without switching the ignition off.
“Key not found” is displayed
This message is displayed when any of the following operations is performed with the key out of the operational range or placed in areas inside the cabin where it is difficult for the key to be detected.
The push button start is pressed with the ignition switched off
The ignition is switched on
All doors are closed without switching the ignition off
“Hold key close to start button” is displayed
This message is displayed when any of the following operations is performed with the key out of the operational range or placed in areas inside the cabin where it is difficult for the key to be detected.
The push button start is pressed with the ignition switched off
Brake pedal is depressed with the ignition switched off
“Key Battery is low” is displayed
This message is displayed when the remaining battery power of the key is low and the ignition is switched from on to off.
Because the key utilizes low-intensity radio waves, the Key Removed From Vehicle Warning may activate if the key is carried together with a metal object or it is placed in a poor signal reception area.
Type B
This indicator has two colours.
KEY Warning Light (Red)
When illuminated
If any malfunction occurs in the keyless entry system, it illuminates continuously.
If the key warning indicator light illuminates or the push button start indicator light (amber) flashes, the engine may not start. If the engine cannot be started, try starting it using the emergency operation for starting the engine, and have the vehicle inspected at an Authorised Mazda Repairer as soon as possible.
Refer to Emergency Operation for Starting the Engine (Search).
When flashing
Under the following conditions, the KEY warning light (red) flashes to notify the driver that the ignition cannot be switched from off.
The key battery is dead.
The key is not within operational range.
The key is placed in areas where it is difficult for the system to detect the signal (Search).
A key from another manufacturer similar to the key is in the operational range.
Under the following conditions, the KEY warning light (red) will flash continuously when the ignition has not been switched off to notify the driver that the key has been removed from the vehicle. The KEY warning light (red) will stop flashing when the key is back inside the vehicle:
The ignition has not been switched off and all the doors and the boot lid/liftgate are closed after removing the key from the vehicle.
Because the key utilizes low-intensity radio waves, the Key Removed From Vehicle Warning may activate if the key is carried together with a metal object or it is placed in a poor signal reception area.
KEY Indicator Light (Green)
When illuminated
When the brake pedal is depressed, the system confirms that the correct key is inside the vehicle, the KEY indicator light (green) illuminates, and the engine can be started (Search).
When flashing
When the ignition is switched from ON to off, the KEY indicator light (green) flashes for approximately 30 seconds indicating that the remaining battery power is low. Replace with a new battery before the key becomes unusable.
Refer to Key Battery Replacement (Search).
Adaptive LED headlights warning light (Amber)
When illuminated
When the ignition is switched ON, this warning light illuminates and then turns off after a few seconds. The warning light illuminates if the area of the windscreen in front of the forward sensing camera (FSC) is fogged or obstructed.
This light turns on if there is a malfunction in the adaptive LED headlights. Have your vehicle inspected by an expert repairer, we recommend an Authorised Mazda Repairer.
Adaptive LED headlights indicator light (Green)
This indicator light illuminates when the system is operating and turns off when the system operation is cancelled.
HBC warning light (Amber)
When illuminated
When the ignition is switched ON, this warning light illuminates and then turns off after a few seconds. The warning light illuminates if the area of the windscreen in front of the forward sensing camera (FSC) is fogged or obstructed.
This light turns on if there is a malfunction in the high beam control system (HBC). Have your vehicle inspected by an expert repairer, we recommend an Authorised Mazda Repairer.
HBC indicator light (Green)
This indicator light illuminates when the system is operating and turns off when the system operation is cancelled.
This light may illuminate when the ignition is switched ON.
It turns off when the glow plugs are warm. If the ignition is left switched ON for a long period of time without the engine running after the glow plugs are warmed up, the glow plugs may warm up again which will illuminate the glow indicator light.
Type A
When “Soot Accumulation in DPF too high” is indicated
The particulate matter (PM) cannot be removed automatically and the amount of collected PM reaches a specified amount.
After the engine has sufficiently warmed up (engine coolant temperature of 80 °C or more), depress the accelerator pedal and drive the vehicle at a speed of 20 km/h or more for about 15 to 20 minutes to eliminate the PM.
When “DPF malfunction” is indicated
Contact an expert repairer, we recommend an Authorised Mazda Repairer.
If the vehicle continues to be driven with “Soot Accumulation in DPF too high” indicated in the display, the particulate matter (PM) increases and the indication may change to “DPF malfunction”. If the indication changes to “DPF malfunction”, have the vehicle inspected immediately at an expert repairer, we recommend an Authorised Mazda Repairer. If the vehicle is not inspected and continues to be driven, the engine may malfunction.
When “DPF malfunction” is indicated in the display, the engine output is restricted to protect the diesel particulate filter.
Type B
The warning light stays on for a few seconds when the ignition is switched ON.
The diesel particulate filter indicator light illuminates when the particulate matter (PM) cannot be removed automatically and the amount of collected PM reaches a specified amount. After the engine has sufficiently warmed up (engine coolant temperature of 80 °C or more), depress the accelerator pedal and drive the vehicle at a speed of 20 km/h or more for about 15 to 20 minutes to eliminate the PM.
If the diesel particulate filter indicator light flashes, contact an expert repairer, we recommend an Authorised Mazda Repairer.
If the vehicle is continually driven as usual with the diesel particulate filter indicator light illuminated, PM increases and the indicator light may start flashing. If the diesel particulate filter indicator light starts flashing, have the vehicle inspected immediately at an expert repairer, we recommend an Authorised Mazda Repairer. If the vehicle is not inspected and continues to be driven, the engine may malfunction.
When the diesel particulate filter indicator light flashes, the engine output is restricted to protect the diesel particulate filter.
Type A
Displays when a preset maintenance period has arrived. Perform maintenance in accordance with the message.
Type B (SKYACTIV-D 2.2)
This indicator light stays on for a few seconds when the ignition is switched ON.
The sedimentor separates water from the fuel.
If water accumulates in this filter, the warning light will flash.
When it does, consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.
This indicator light stays on for a few seconds when the ignition is switched ON. If the TCS or DSC is operating, the indicator light flashes.
If the light stays on, the TCS, DSC or the brake assist system may have a malfunction and they may not operate correctly. Take your vehicle to an expert repairer, we recommend an Authorised Mazda Repairer.
In addition to the indicator light flashing, a slight labouring sound will come from the engine. This indicates that the TCS/DSC is operating properly.
On slippery surfaces, such as fresh snow, it will be impossible to achieve high rpm when the TCS is on.
This indicator light stays on for a few seconds when the ignition is switched ON.
It also illuminates when the DSC OFF switch is pressed and TCS/DSC is switched off.
Refer to DSC OFF Switch (Search).
If the light remains illuminated and the TCS/DSC is not switched off, take your vehicle to an expert repairer, we recommend an Authorised Mazda Repairer. The DSC may have a malfunction.
This indicator light illuminates for a few seconds when the ignition is switched ON.
When the Smart Brake Support/Smart City Brake Support (SBS/SCBS) system is turned off, the Smart Brake Support/Smart City Brake Support (SBS/SCBS) OFF indicator light turns on.
Refer to Personalisation Features (Search).
The indication is displayed in the multi information display during SCBS brake operation or brake assist (SCBS brake assist) operation.
If the engine is started after the vehicle has not been driven for a long period of time, an “i-ELOOP charging” message may be indicated in the display. Leave the engine idling and wait until the message disappears.
If the vehicle is driven while the message is displayed, a beep sound is heard. If you turn the steering wheel while the message is displayed, it will feel heavier than normal, but this does not indicate an abnormality. Stop the vehicle in a safe location with the engine running and do not attempt to turn the steering wheel. The steering operation will return to normal after the message is no longer displayed.
The light illuminates continuously when the engine coolant temperature is low and turns off after the engine is warm.
If the low engine coolant temperature indicator light remains illuminated after the engine has been sufficiently warmed up, the temperature sensor could have a malfunction. Consult an expert repairer, we recommend an Authorised Mazda Repairer.
The selector position is indicated when the ignition is switched ON.
Gear position indicator
In manual shift mode, the “M” of the shift position indicator illuminates and the numeral for the selected gear displays.
When the sport mode is selected, the select mode Indication turns on in the instrument cluster.
If the mode cannot be switched to drive mode, the select mode indication flashes to notify the driver.
This light indicates one of two things:
The high-beam headlights are on.
The direction indicator lever is in the flash-to-pass position.
When operating the direction indicator lights, the left or right direction indicator light flashes to indicate which direction indicator light is operating (Search).
When operating the hazard warning lights, both direction indicator lights flash (Search).
If an indicator light flashes abnormally, one of the direction indicator bulbs may be burned out. Consult an expert repairer, we recommend an Authorised Mazda Repairer.
This indicator light starts flashing every 2 seconds when the ignition is switched from ON to OFF and the immobilizer system is armed.
The light stops flashing when the ignition is switched ON with the correct key.
At this time, the immobilizer system is disarmed and the light illuminates for about 3 seconds and then turns off.
If the engine does not start with the correct key, and the security indicator light keeps illuminating or flashing, the system may have a malfunction. Consult an Authorised Mazda Repairer.
Mazda Radar Cruise Control (MRCC) Warning Light (Amber)
Illuminated
When the ignition is switched ON, the warning light is illuminated and then turns off after a few seconds.
The warning light turns on if there is a malfunction in the system while the Mazda Radar Cruise Control (MRCC) system is on. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
Mazda Radar Cruise Control (MRCC) Indicator Light (Green)
Illuminated
Illuminated when the speed for the Mazda Radar Cruise Control (MRCC) system is set.
The indicator light has two colours.
Cruise Main Indicator Light (Amber)
The indicator light illuminates amber when the cruise control system is activated.
Cruise Set Indicator Light (Green)
The indicator light illuminates green when a cruising speed has been set.
Type A
The Blind Spot Monitoring (BSM) OFF indication illuminates when the Blind Spot Monitoring (BSM) switch is pressed to turn off the Blind Spot Monitoring (BSM) and Rear Cross Traffic Alert (RCTA) systems.
If the indication remains displayed even though the Blind Spot Monitoring (BSM) switch has been operated, it indicates a problem in the system. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
Type B
This indicator light illuminates for a few seconds when the ignition is switched ON.
The Blind Spot Monitoring (BSM) OFF indicator light illuminates when the Blind Spot Monitoring (BSM) switch is pressed to turn off the Blind Spot Monitoring (BSM) and Rear Cross Traffic Alert (RCTA) systems.
A problem in the system may be indicated under the following conditions. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
The light does not turn on when the ignition is switched ON.
It remains illuminated even though the Blind Spot Monitoring (BSM) switch has been switched off.
It turns on while driving the vehicle.
If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors can detect, the system may pause (The Blind Spot Monitoring (BSM) OFF indication/indicator light in the instrument cluster illuminates). However, it does not indicate a malfunction.
This indicator light illuminates when the exterior lights and instrument panel illumination are on.
The light continues to flash if the lighting system has a malfunction. Consult an expert repairer, we recommend an Authorised Mazda Repairer.
This warning light illuminates for a few seconds when the ignition is switched ON.
This light illuminates if there is a malfunction in the LED headlight. Have your vehicle inspected by an expert repairer, we recommend an Authorised Mazda Repairer.
This light illuminates when the fog lights are operating.