Audio Set [Type A (non-touchscreen)]

Volume adjustment

To adjust the volume, turn the power/volume dial. Turn the power/volume dial clockwise to increase volume, anticlockwise to decrease it.

Clock

Operating the Radio

Operating the Compact Disc (CD) Player (Some Models)

Bluetooth^® (Some Models)

Bluetooth^® Preparation (Some Models)

Available Language (Some Models)

Security Setting (Some Models)

Bluetooth^® Audio (Some Models)

Applicable Bluetooth^® specification (Recommended)

Ver. 2.0

Response profile

A2DP (Advanced Audio Distribution Profile) Ver. 1.0
AVRCP (Audio/Video Remote Control Profile) Ver. 1.0/1.3

A2DP is a profile which transmits only audio to the Bluetooth^® unit. If your Bluetooth^® audio device corresponds only to A2DP, but not AVRCP, you cannot operate it using the control panel of the vehicle's audio system. In this case, only the operations on the mobile device are available the same as when a portable audio device for a non-compliant Bluetooth^® device is connected to the AUX terminal.

Function	A2DP	AVRCP
Function	A2DP	Ver. 1.0	Ver. 1.3
Playback	—	X	X
Pause	—	X	X
File (Track) up/down	—	X	X
Reverse	—	—	X
Fast-forward	—	—	X
Text display	—	—	X

X: Available

—: Not available

The battery consumption of Bluetooth^® audio devices increases while Bluetooth^® is connected.
If a general mobile phone device is USB connected during music playback over the Bluetooth^® connection, the Bluetooth^® connection is disconnected. For this reason, you cannot have music playback over a Bluetooth^® connection and music playback using a USB connection at the same time.
The system may not operate normally depending on the Bluetooth^® audio device.

Close Note

View Note

Switching to Bluetooth^® audio mode

To listen to music or voice audio recorded to a Bluetooth^® audio device, switch to the Bluetooth^® audio mode to operate the audio device using the audio system control panel. Any Bluetooth^® audio device must be paired to the vehicle's Bluetooth^® unit before it can be used.

Refer to Bluetooth^® Preparation (Type A) (Search).

Turn on the Bluetooth^® audio device's power.
Switch the ignition to ACC or ON.

Make sure that the “ ” symbol is displayed in the audio display. The symbol is not displayed if an un-paired Bluetooth^® audio device is being used or the vehicle's Bluetooth^® unit has a malfunction.

Some Bluetooth^® audio devices need a certain amount of time before the “” symbol is displayed.

Close Note

View Note
Press the media button () to switch to the Bluetooth^® audio mode and start playback.

If the current device version is lower than AVRCP Ver. 1.3: “BT Audio” is displayed.

If the current device is AVRCP Ver. 1.3: The playback time is displayed.

If the Bluetooth^® audio device does not begin playback, press the Play/Pause button (4).
If a call is received on a hands-free mobile phone during playback from the Bluetooth^® audio device, the playback is stopped. Playback from the Bluetooth^® audio device resumes after the call ends.

Close Note

View Note