Turning the Engine Off
Do not stop the engine while the vehicle is moving:
Stopping the engine while the vehicle is moving for any reason other than in an emergency is dangerous. Stopping the engine while the vehicle is moving will result in reduced braking ability due to the loss of power braking, which could cause an accident and serious injury.
-
Stop the vehicle completely.
-
(Manual transaxle)
Shift into neutral and set the parking brake.
(Automatic transaxle)
Shift the selector lever to the P position and set the parking brake.
-
Press the push button start to turn off the engine. The ignition position is off.
-
When leaving the vehicle, make sure the push button start is off.
-
(SKYACTIV-D 2.2)
If the engine is started and stopped repeatedly before it warms up, the engine may speed up while the vehicle is stopped to clean the engine internally. Do not stop the engine until the engine returns to running at its normal speed.
-
(SKYACTIV-G 2.0, SKYACTIV-G 2.5)
The cooling fan in the engine compartment could turn on for a few minutes after the ignition is switched from ON to OFF, whether or not the A/C is on or off, to cool the engine compartment quickly.
-
If the system detects that the remaining battery power of the key is low when the ignition is switched from ON to ACC or OFF, the following is indicated.
Replace with a new battery before the key becomes unusable.
Refer to Key Battery Replacement (Search).
(Vehicle equipped with Type A instrument cluster)
A message is indicated in the display of the instrument cluster.
(Vehicle equipped with Type B instrument cluster)
The KEY indicator light (green) flashes for approximately 30 seconds.
Refer to Warning/Indicator Lights (Search).
-
(Automatic transaxle)
If the engine is turned off while the selector lever is in a position other than P, the ignition switches to ACC.
