Audio Set [Type A (non-touchscreen)]

Power/Volume/Sound Controls

Audio sound adjustment

  1. Press the menu button () to select the function. The selected function will be indicated.

  2. Turn the audio control dial to adjust the selected functions as follows:

Indication

Setting value

Turn Anticlockwise

Turn Clockwise

AF*1

(Setting Alternative Frequency (AF))

Off

On

REG*1

(Setting Regional Programme (REG))

Off

On

ALC

(Automatic volume adjustment)

Level decrease

Level increase

BASS

(Low pitch sound)

Decrease bass

Increase bass

TREB

(Treble sound)

Decrease treble

Increase treble

FADE

(Front/back volume balance)

Shift the sound to the front

Shift the sound to the rear

BAL

(Left/right volume balance)

Shift the sound to the left

Shift the sound to the right

BEEP

(Audio operation sound)

Off

On

BT SETUP*2

Select mode

12Hr 24Hr

(12 Hr/24 Hr time adjustment)

12Hr (Flashing)

24Hr (Flashing)

*1 With Radio Data System (RDS)

*2 Depending on the model, this function may not be available.

 

If not operated for several seconds, the display returns to the previous display. To reset bass, treble, fade, and balance, press the menu button () for 2 seconds. The unit will beep and “CLEAR” will be displayed.

Close Note
View Note

AF (Setting Alternative Frequency (AF)) (Some Models)

The AF function of the Radio Data System (RDS) can be set on or off.

Refer to Radio Data System (RDS) (Search).

REG (Setting Regional Programme (REG)) (Some Models)

The REG function of the Radio Data System (RDS) can be set on or off.

Refer to Radio Data System (RDS) (Search).

ALC (Automatic volume adjustment)

The automatic level control (ALC) changes the audio volume automatically according to the vehicle speed. The faster the vehicle speed, the higher the volume increases. ALC has ALC OFF and ALC LEVEL 1 to 7 modes. At ALC LEVEL 7, the amount that the volume can increase is at the maximum. Select the mode according to the driving conditions.

BEEP (Audio operation sound)

The setting for the operation sound when pressing and holding a button can be changed. The initial setting is ON. Set to OFF to mute the operation sound.

BT SETUP mode (Some Models)

Music and other audio such as voice data recorded on portable audio devices and mobile phones available on the market which are equipped with the Bluetooth® transmission function can be listened to via wireless transmission over the vehicle's speakers. Using the BT SETUP mode, these devices can be programmed to the Bluetooth® unit or changed (Search).

12Hr 24Hr (12 Hr/24 Hr time adjustment)

Rotating the audio control dial switches the display between 12 and 24-hour clock time (Search).

Bluetooth® Hands-Free (Some Models)

Bluetooth® Hands-Free (Some Models)

Making a Call

Phonebook Usage

Telephone calls can be made by saying the name of a person (voice tag) whose phone number has been registered in Bluetooth® Hands-Free in advance. Refer to Phonebook registration.

  1. Press the pick-up button or talk button with a short press.

  2. Say: [Beep] “Call”

  3. Prompt: “Name please.”

  4. Say: [Beep] “XXXXX... (Ex. “John's phone”)” (Say a voice tag registered in the phonebook.)

  5. Prompt: “Calling XXXXX... (Ex. “John's phone”) XXXX (Ex. “at home”). Is this correct?” (Voice tag and phone number location registered in phonebook).

  6. Say: [Beep] “Yes”

  7. Prompt: “Dialing”

 

The “Call” command and the voice tag can be combined.

Ex. In Step 2, say, “Call John's phone”, then, Steps 3 and 4 can be skipped.

Close Note
View Note

Phonebook registration

Phone numbers can be registered to the Bluetooth® Hands-Free phonebook.

 

Do this function only when parked. It is too distracting to attempt while driving and you may make too many errors to be effective.

Close Note
View Note

  1. Press the pick-up button or talk button with a short press.

  2. Say: [Beep] “Phonebook”

  3. Prompt: “Select one of the following: New entry, edit, list names, delete, erase all or import contact.”

  4. Say: [Beep] “New entry”

  5. Prompt: “Name please.”

  6. Say: [Beep] “XXXXX... (Ex. “Mary's phone”)” (Say a voice tag for the name registered.)

  7. Prompt: “Adding XXXXX... (Ex. “Mary's phone”) (Registered voice tag). Is this correct?”

  8. Say: [Beep] “Yes”

  9. Prompt: “Home, Work, Mobile, or Other?”

  10. Say: [Beep] “Mobile” (Say “Home” , “Work”, “Mobile”, or “Other”, for the desired location to be registered.)

  11. Prompt: “Mobile (Location to be registered). Is this correct?”

  12. Say: [Beep] “Yes”

  13. Prompt: “Number, please.”

  14. Say: [Beep] “XXXXXXXXXXX” (Say the phone number to be registered.)

  15. Prompt: “XXXXXXXXXXX (Phone number registration). After the beep, continue to add numbers, or say Go-Back to re-enter the last entered numbers, or press the Pick-Up button to save the number.”

  16. (Registration)

    Press the pick-up button or say “Enter”, then go to Step 17.

    (Adding/inputting telephone number)

    Say, “XXXX” (desired telephone number), then go to Step 15.

    (Telephone number correction)

    Say, “Go Back”. The prompt replies, “Go Back. The last entered numbers have been removed.”. Then go back to Step 13.

  17. Prompt: “Number saved. Would you like to add another number for this entry?”

  18. Say: [Beep] “Yes” or “No”.

  19. If “Yes”, an additional phone number registration can be made for the same entry.

    If “No”, the system returns to standby status.

(Import contact)

Phonebook data from your device (Mobile phone) can be sent and registered to your Bluetooth® Hands-Free phonebook using Bluetooth®.

  1. Press the pick-up button or talk button with a short press.

  2. Say: [Beep] “Phonebook”

  3. Prompt: “Select one of the following: New entry, edit, list names, delete, erase all or import contact.”

  4. Say: [Beep] “Import contact”

  5. Prompt: “The hands free system is ready to receive a contact from the phone; only a home, work, mobile number can be imported into the hands free system. The import contact process requires the user to operate the phone. Refer to the phone's manual for information on how to operate the phone to perform the import operation.”

  6. Prompt: “X (Number of locations which include data) numbers have been imported. What name would you like to use for these numbers?”

  7. Say: [Beep] “XXXXX... (Ex. “Mary's phone”)” (Say a voice tag for the name registered.)

  8. Prompt: “Adding XXXXX... (Ex. “Mary's phone”) (Voice tag). Is this correct?”

  9. Say: [Beep] “Yes”

  10. Prompt: “Number saved. Would you like to import another contact?”

  11. Say: [Beep] “Yes” or “No”

  12. If “Yes”, the procedure proceeds to Step 5.

    If “No”, the system returns to standby status.

Editing phonebook

The data registered to the Bluetooth® Hands-Free phonebook can be edited.

 

Do this function only when parked. It is too distracting to attempt while driving and you may make too many errors to be effective.

Close Note
View Note

  1. Press the pick-up button or talk button with a short press.

  2. Say: [Beep] “Phonebook”

  3. Prompt: “Select one of the following: New entry, edit, list names, delete, erase all or import contact.”

  4. Say: [Beep] “Edit”

  5. Prompt: “Please say the name of the entry you would like to edit or say, “List names”.”

  6. Say: [Beep] “XXXXX... (Ex. “Mary's phone”)” (Say the voice tag for the registered name to be edited in the phonebook.)

  7. Prompt: “Home, Work, Mobile, or Other?”

  8. Say: [Beep] “Home” (Say the registered location to be edited: “Home”, “Work”, “Mobile”, or “Other”.)

  9. Prompt: “XXXXX... (Ex. “Mary's phone”) (Registered voice tag) XXXX (Ex. “Home”) (Registered location). Is this correct?”

  10. Say: [Beep] “Yes”

  11. Prompt: “The current number is XXXXXXXXXXX (Ex. “555-1234”) (Currently registered number). New number, please.”

     

    If there was no previous phone number registered to a location (Ex. “Work”), the prompt will only read out “Number, please”

    Close Note
    View Note

  12. Say: [Beep] “XXXXXXXXXXX (Ex. “555-5678”)” (Say the new phone number to be registered.)

  13. Prompt: “XXXXXXXX (Telephone number) After the beep, continue to add numbers, or say Go-Back to re-enter the last entered numbers, or press the Pick-Up button to save the number.”

  14. (Number Change)

    Press the pick-up button, then go to Step 15.

    (Adding/inputting telephone number)

    Say, “XXXX” (desired telephone number), then go to Step 13.

    (Telephone number correction)

    Say, “Go Back”. The prompt replies, “Go Back. The last entered numbers have been removed. Number, please.”. Then go back to Step 12.

  15. Prompt: “Number changed.”

Phonebook data deletion

(Erasing individual phonebook data)

Individual data registered to the Bluetooth® Hands-Free phonebook can be cleared.

 

Do this function only when parked. It is too distracting to attempt while driving and you may make too many errors to be effective.

Close Note
View Note

  1. Press the pick-up button or talk button with a short press.

  2. Say: [Beep] “Phonebook”

  3. Prompt: “Select one of the following: New entry, edit, list names, delete, erase all or import contact.”

  4. Say: [Beep] “Delete”

  5. Prompt: “Please say the name of the entry you would like to delete or say, “List names”. ”

  6. Say: [Beep] “XXXXX... (Ex. “John's phone”) ” (Say the registered voice tag to be deleted from the phonebook.)

  7. Prompt: “Deleting XXXXX... (Ex. “John's phone”) (Registered voice tag) Home (Registered location). Is this correct?”

  8. Say: [Beep] “Yes”

  9. Prompt: “XXXXX... (Ex. “John's phone”) (Registered voice tag) Home (Registered location) deleted.”

(Complete deletion of the phonebook data)

All data registered to the Bluetooth® Hands-Free phonebook can be erased.

 

Do this function only when parked. It is too distracting to attempt while driving and you may make too many errors to be effective.

Close Note
View Note

  1. Press the pick-up button or talk button with a short press.

  2. Say: [Beep] “Phonebook”

  3. Prompt: “Select one of the following: New entry, edit, list names, delete, erase all or import contact.”

  4. Say: [Beep] “Erase all”

  5. Prompt: “Are you sure you want to delete everything from your Hands Free system phonebook?”

  6. Say: [Beep] “Yes”

  7. Prompt: “You are about to delete everything from your Hands Free system phonebook. Do you want to continue?”

  8. Say: [Beep] “Yes”

  9. Prompt: “Please wait, deleting the Hands Free system phonebook.”

  10. Prompt: “Hands-Free system phonebook deleted.”

Read-out of names registered to the Bluetooth® Hands-Free phonebook

Bluetooth® Hands-Free can read out the list of names registered to its phonebook.

  1. Press the pick-up button or talk button with a short press.

  2. Say: [Beep] “Phonebook”

  3. Prompt: “Select one of the following: New entry, edit, list names, delete, erase all or import contact.”

  4. Say: [Beep] “List names”

  5. Prompt: “XXXXX..., XXXXX..., XXXXX... (Ex. “John's phone”, Mary's phone, Bill's phone)” (Voice guidance reads out the voice tags registered to the phonebook.)

    Press the talk button with a short press during the read-out at the desired name, and then say one of the following voice commands to execute it.

    • “Continue”: Continues the list readout.

    • “Call”: Calls the registered phonebook data when the talk button is short-pressed.

    • “Edit”: Edits the registered phonebook data when the talk button is short-pressed.

    • “Delete”: Deletes the registered phonebook data when the talk button is short-pressed.

    • “Previous”: Returns to the previous phonebook data in read-out when the talk button is short-pressed.

  6. Prompt: “End of list, would you like to start from the beginning?”

  7. Say: [Beep] “No”

Redial Function

Redialing the number of the person previously dialed using the phone is possible.

  1. Press the pick-up button or talk button with a short press.

  2. Say: [Beep] “Redial”

  3. Prompt: “Dialing”

Telephone Number Input

 

Practice this while parked until you are confident you can do it while driving in a non-taxing road situation. If you are not completely comfortable, make all calls from a safe parking position, and only start driving when you can devote your full attention to driving.

Close Note
View Note

  1. Press the pick-up button or talk button with a short press.

  2. Say: [Beep] “Dial”

  3. Prompt: “Number, please”

  4. Say: [Beep] “XXXXXXXXXXX (Telephone number)”

  5. Prompt: “XXXXXXXXXXX. (Telephone number) After the beep, continue to add numbers, or say Go-Back to re-enter the last entered numbers, or press the Pick-Up button to execute dialing.”

  6. (Dialing)

    Press the pick-up button or say “Dial”, then go to Step 7.

    (Adding/inputting telephone number)

    Say, “XXXX” (desired telephone number), then go to Step 5.

    (Telephone number correction)

    Say, “Go Back”. The prompt replies, “Go Back. The last entered numbers have been removed.”. Then go back to Step 3.

  7. Prompt: “Dialing”

 

The “Dial” command and a telephone number can be combined.

Ex. In Step 2, say, “Dial 123-4567” then, Steps 3 and 4 can be skipped.

Close Note
View Note

Emergency calls

A call can be made to the emergency phone number (112) using the voice input command.

  1. Press the pick-up button or talk button with a short press.

  2. Say: [Beep] “Emergency”

  3. Prompt: “Dialing “112”, is this correct?”

  4. Say: [Beep] “Yes”

  5. Prompt: “Dialing”

Receiving an Incoming Call

  1. Prompt: “Incoming call, press the pick-up button to answer”

  2. To accept the call, press the pick-up button.

    To reject the call, press the hang-up button.

Hanging Up a Call

Press the hang-up button during the call. A beep sound will confirm that call is ended.

Transferring a Call from Hands-Free to a Device (Mobile Phone)

Communication between the hands-free unit and a device (Mobile phone) is cancelled, and the line can be switched to a standard call using a device (Mobile phone).

  1. Press the talk button with a short press.

  2. Say: [Beep] “Transfer call”

  3. Prompt:“Transferred call to phone”

Transferring a Call from a Device (Mobile Phone) to Hands-Free

Communication between devices (Mobile phone) can be switched to Bluetooth® Hands-Free.

  1. Press the talk button with a short press.

  2. Say: [Beep] “Transfer call”

  3. Prompt:“Transferred call to Hands Free system”

Call interrupt

A call can be interrupted to receive an incoming call from a third party.

Switch to a new incoming call using the following methods.

(Method 1)

  1. Press the pick-up button.

  2. Prompt: “Swapping calls.”

(Method 2)

  1. Press the talk button with a short press.

  2. Say: [Beep] “Swap calls”

  3. Prompt: “Swapping calls.”

 

  • To refuse an incoming call, press the hang-up button.

  • After receiving a new incoming call, the previous call is placed on hold.

Close Note
View Note

Switching calls

Switching back to the previous call can also be done.

Method 1

  1. Press the pick-up button.

  2. Prompt: “Swapping calls.”

Method 2

  1. Press the talk button with a short press.

  2. Say: [Beep] “Swap calls”

  3. Prompt: “Swapping calls.”

Three-way call function

  1. Press the talk button with a short press.

  2. Say: [Beep] “Join calls”

  3. Prompt: “Joining calls”

Making a call using a telephone number

  1. Press the talk button with a short press.

  2. Say: [Beep] “Dial”

  3. Prompt: “Number, please”

  4. Say: [Beep] “XXXXXXXXXXX (Telephone number)”

  5. Prompt: “XXXXXXXXXXX. (Telephone number) After the beep, continue to add numbers, or say Go-Back to re-enter the last entered numbers, or press the Pick-Up button to execute dialing.”

  6. (Dialing)

    Press the pick-up button or say “Dial”, then go to Step 7.

    (Adding/inputting telephone number)

    Say, “XXXX” (desired telephone number), then go to Step 5.

    (Telephone number correction)

    Say, “Go Back”. The prompt replies, “Go Back. The last entered numbers have been removed.”. Then go back to Step 3.

  7. Prompt: “Dialing”

Making calls using the phonebook

  1. Press the talk button with a short press.

  2. Say: [Beep] “Call”

  3. Prompt: “Name please.”

  4. Say: [Beep] “XXXXX... (Ex. “John's phone”)” (Say a voice tag registered in the phonebook.)

  5. Prompt: “Calling XXXXX... (Ex. “John's phone”) XXXX (Ex. “at home”). Is this correct?” (Voice tag and phone number location registered in phonebook).

  6. Say: [Beep] “Yes”

  7. Prompt: “Dialing”

Redialing function

  1. Press the talk button with a short press.

  2. Say: [Beep] “Redial”

  3. Prompt: “Dialing”

Ending the current call

Press the hang-up button during the call.

DTMF (Dual Tone Multi-Frequency Signal) Transmission

This function is used when transmitting DTMF via the user's voice. The receiver of a DTMF transmission is generally a home telephone answering machine or a company's automated guidance call centre (When you send tone signals back according to the voice guidance recording).

  1. Press the talk button with a short press.

  2. Say: [Beep] “XXXX... send” (Say DTMF code)

  3. Prompt:“Sending XXXX... (DTMF code)”

Page top