Scheduled Maintenance

Scheduled Maintenance

Scheduled Maintenance

 

After the prescribed period, continue to follow the described maintenance at the recommended intervals.

Close Note
View Note

Emission control and related systems

The ignition and fuel systems are highly important to the emission control system and to efficient engine operation. Do not tamper with them.

All inspections and adjustments must be made by an expert repairer, we recommend an Authorised Mazda Repairer.

Europe

Maintenance Interval

Number of months or kilometres, whichever comes first.

Months

12

24

36

48

60

72

84

96

108

120

132

144

×1000 km

15

30

45

60

75

90

105

120

135

150

165

180

Drive belts*1

I

I

I

I

Engine oil & filter*2

Replace when indicator is ON. (Max interval: 12 months or 15,000 km)

Cooling system

I

I

I

I

I

I

Engine coolant*3

Replace at first 195,000 km or 10 years; after that, every 90,000 km or 5 years.

Air filter*4

Replace every 60,000 km or 3 years.

Fuel lines and hoses

I

I

I

I

I

I

Spark plugs

I

I

I

R

I

I

I

R

I

I

I

R

Evaporative system (if installed)

I

I

I

I

Battery*5

I

I

I

I

I

I

I

I

I

I

I

I

Brake lines, hoses and connections

I

I

I

I

I

I

I

I

I

I

I

I

Brake fluid*6

R

R

R

R

R

R

Parking brake

I

I

I

I

I

I

I

I

I

I

I

I

Disc brakes

I

I

I

I

I

I

I

I

I

I

I

I

Steering operation and linkages

I

I

I

I

I

I

Rear differential oil

*7

Transfer oil

*7

Front and rear suspension, ball joints and wheel bearing axial play

I

I

I

I

I

I

Driveshaft dust boots

I

I

I

I

I

I

Exhaust system and heat shields

I

I

Bolts and nuts on chassis and body

T

T

T

T

T

T

Body condition (for rust, corrosion and perforation)

Inspect annually.

Cabin air filter (if installed)

R

R

R

R

R

R

Tyres (including spare tyre) (with inflation pressure adjustment)*8

I

I

I

I

I

I

I

I

I

I

I

I

Emergency flat tyre repair kit (if installed)*9

Inspect annually.

Chart symbols:

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.

R: Replace

C: Clean

T: Tighten

L: Lubricate

D: Drain

Remarks:

  1. Also inspect the air conditioner drive belts, if installed.

    If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 15,000 km or 12 months.

    1. Driving in dusty conditions

    2. Extended periods of idling or low speed operation

    3. Driving for long period in cold temperatures or driving regularly at short distance only

    4. Driving in extremely hot conditions

    5. Driving in mountainous conditions continually

    6. Driving for long period in extremely wet or heavy rain condition

  2. The vehicle calculates the remaining oil life based on engine operating conditions and lets you know when an oil change is due by illuminating the wrench indicator light in the instrument cluster.

    Replace the engine oil and filter when message/wrench indicator light is ON. And they must be changed at least once a year or within 15,000 km since last engine oil and filter change.

    The system must be reset whenever replacing the engine oil regardless of the message/wrench indicator light display.

  3. Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may cause serious damage to the engine and cooling system.

  4. If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air filter more often than the recommended intervals.

  5. Inspect the battery electrolyte level, specific gravity and outer appearance. The sealed battery only requires an outer appearance inspection.

  6. If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.

  7. If this component has been submerged in water, the oil should be replaced.

  8. Tyre rotation is recommended every 10,000 km.

  9. Check the tyre repair fluid expiration date every year when performing the periodic maintenance. Replace the tyre repair fluid bottle with new one before the expiration date.

Except Europe

Russia/Belarus/Azerbaijan/Kazakhstan

Maintenance Interval

Number of months or kilometres, whichever comes first.

Months

12

24

36

48

60

72

84

96

108

120

132

144

×1000 km

15

30

45

60

75

90

105

120

135

150

165

180

Drive belts*1

I

I

I

I

I

I

I

I

I

I

I

I

Engine oil

Russia/

Belarus/

Kazakhstan*2

Replace when indicator is ON. (Max interval: 12 months or 15,000 km)

Azerbaijan*3*4*5

Replace every 5,000 km or 6 months.

Engine oil filter

Russia/

Belarus/

Kazakhstan*2

Replace when indicator is ON. (Max interval: 12 months or 15,000 km)

Azerbaijan*6

Replace every 10,000 km or 12 months.

Cooling system

I

I

I

I

I

I

Engine coolant*7

Replace at first 195,000 km or 10 years; after that, every 90,000 km or 5 years.

Air filter*8

Russia/

Belarus/

Kazakhstan

C

C

R

C

C

R

C

C

R

C

C

R

Azerbaijan

C

R

C

R

C

R

C

R

C

R

C

R

Fuel filter

Russia/

Belarus/

Kazakhstan

Replace every 120,000 km.

Azerbaijan

Replace every 60,000 km.

Fuel lines and hoses

I

I

I

I

I

I

Spark plugs

I

I

I

R

I

I

I

R

I

I

I

R

Evaporative system (if installed)

I

I

I

Battery*9

I

I

I

I

I

I

I

I

I

I

I

I

Brake lines, hoses and connections

I

I

I

I

I

I

I

I

I

I

I

I

Brake fluid*10

R

R

R

R

R

R

Parking brake

I

I

I

I

I

I

I

I

I

I

I

I

Disc brakes

I

I

I

I

I

I

I

I

I

I

I

I

Steering operation and linkages

I

I

I

I

I

I

I

I

I

I

I

I

Rear differential oil

*11

Transfer oil

*11

Front and rear suspension, ball joints and wheel bearing axial play

I

I

I

I

I

I

I

I

I

I

I

I

Driveshaft dust boots

I

I

I

I

I

I

I

I

I

I

I

I

Exhaust system and heat shields

I

I

I

I

I

I

I

I

I

I

I

I

Bolts and nuts on chassis and body

T

T

T

T

T

T

T

T

T

T

T

T

Hinges and catches

L

L

L

L

L

L

L

L

L

L

L

L

All electrical system

I

I

I

I

I

I

I

I

I

I

I

I

Body condition (for rust, corrosion and perforation)

Inspect annually.

Cabin air filter (if installed)

R

R

R

R

R

R

Tyres (including spare tyre) (with inflation pressure adjustment)*12

I

I

I

I

I

I

I

I

I

I

I

I

Emergency flat tyre repair kit (if installed)*13

Inspect annually.

Chart symbols:

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.

R: Replace

L: Lubricate

C: Clean

T: Tighten

D: Drain

Remarks:

  1. Also inspect the air conditioner drive belts, if installed.

    If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 7,500 km or 6 months.

    1. Driving in dusty conditions

    2. Extended periods of idling or low speed operation

    3. Driving for long period in cold temperatures or driving regularly at short distance only

    4. Driving in extremely hot conditions

    5. Driving in mountainous conditions continually

    6. Driving for long period in extremely wet or heavy rain condition

  2. The vehicle calculates the remaining oil life based on engine operating conditions and lets you know when an oil change is due by illuminating the wrench indicator light in the instrument cluster.

    Replace the engine oil and filter when message/wrench indicator light is ON. And they must be changed at least once a year or within 15,000 km since last engine oil and filter change.

    The system must be reset whenever replacing the engine oil regardless of the message/wrench indicator light display.

  3. If the vehicle is operated primarily under any of the following conditions, replace the engine oil at every 2,500 km or 3 months.

    1. Purpose of vehicle use is police car, taxi or driving school car.

    2. Driving in dusty conditions

    3. Extended periods of idling or low speed operation

    4. Driving for long period in cold temperatures or driving regularly at short distance only

    5. Driving in extremely hot conditions

    6. Driving in mountainous conditions continually

  4. Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench indicator light display.

  5. Replace the engine oil when message/wrench indicator light is ON.

  6. If the vehicle is operated primarily under any of the following conditions, replace the engine oil filter at every 5,000 km or 6 months.

    1. Purpose of vehicle use is police car, taxi or driving school car.

    2. Driving in dusty conditions

    3. Extended periods of idling or low speed operation

    4. Driving for long period in cold temperatures or driving regularly at short distance only

    5. Driving in extremely hot conditions

    6. Driving in mountainous conditions continually

  7. Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may cause serious damage to the engine and cooling system.

  8. If the vehicle is operated in very dusty or sandy areas, clean the air filter at every 7,500 km or 6 months.

  9. Inspect the battery electrolyte level, specific gravity and outer appearance. The sealed battery only requires an outer appearance inspection.

  10. If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.

  11. If this component has been submerged in water, the oil should be replaced.

  12. Tyre rotation is recommended every 10,000 km.

  13. Check the tyre repair fluid expiration date every year when performing the periodic maintenance. Replace the tyre repair fluid bottle with new one before the expiration date.

Except Russia/Belarus/Azerbaijan/Kazakhstan

Maintenance Interval

Number of months or kilometres (miles), whichever comes first.

Months

6

12

18

24

30

36

42

48

54

60

66

72

78

84

90

96

×1000 km

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

×1000 miles

6.25

12.5

18.75

25

31.25

37.5

43.75

50

56.25

62.5

68.75

75

81.25

87.5

93.75

100

Spark plugs*1

Replace every 60,000 km (37,500 miles).

Evaporative system (if installed)

I

I

I

I

I

I

I

I

Drive belts*2

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

Engine oil*3*4*5

Except below countries

R

R

R

R

R

R

R

R

R

R

R

R

R

R

R

R

Georgia/

Armenia/

Cambodia/

Gabon/

Ghana/

Cameroon/

Burundi/

Mozambique/

Mongolia

Replace every 5,000 km (3,125 miles) or 6 months.

Tanzania

Replace every 3,000 km (1,875 miles) or 3 months.

Engine oil filter*3

Except below countries

R

R

R

R

R

R

R

R

R

R

R

R

R

R

R

R

Georgia/

Armenia/

Cambodia

Replace every 10,000 km (6,250 miles) or 1 year.

Gabon/

Ghana/

Cameroon/

Burundi/

Mozambique/

Mongolia

Replace every 5,000 km (3,125 miles) or 6 months.

Tanzania

Replace every 3,000 km (1,875 miles) or 3 months.

Fuel filter

Replace every 60,000 km (37,500 miles).

Fuel system*6*7

affected countries*8

Clean the fuel system by Mazda genuine deposit cleaner at every 10,000 km (6,250 miles).

Cooling system

I

I

I

I

I

I

I

I

Engine coolant*9

Replace at first 200,000 km (125,000 miles) or 10 years; after that, every 100,000 km (62,500 miles) or 5 years.

Air filter*10

Except below countries

C

C

R

C

C

R

C

C

Georgia/

Armenia

C

R

C

R

C

R

C

R

Fuel lines and hoses

I

I

I

I

I

I

I

I

Battery*11

I

I

I

I

I

I

I

I

Brake lines, hoses and connections

I

I

I

I

I

I

I

I

Brake fluid*12

I

I

I

R

I

I

I

R

I

I

I

R

I

I

I

R

Parking brake

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

Power brake unit (Brake booster) and hoses

I

I

I

I

I

I

I

I

Disc brakes

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

Steering operation and linkages

I

I

I

I

I

I

I

I

Rear differential oil

*13

Transfer oil

*13

Front and rear suspension, ball joints and wheel bearing axial play

I

I

I

I

I

I

I

I

Driveshaft dust boots

I

I

I

I

Exhaust system and heat shields

Inspect every 80,000 km (50,000 miles).

Bolts and nuts on chassis and body

T

T

T

T

T

T

T

T

Body condition (for rust, corrosion and perforation)

Inspect annually.

Cabin air filter (if installed)

R

R

R

R

R

R

R

R

Tyres (including spare tyre) (with inflation pressure adjustment)

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

Tyre rotation

Rotate every 10,000 km (6,250 miles).

Emergency flat tyre repair kit (if installed)*14

Inspect annually.

Chart symbols:

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.

R: Replace

L: Lubricate

C: Clean

T: Tighten

D: Drain

Remarks:

  1. In the countries below, inspect the spark plugs at every 10,000 km (6,250 miles) or 1 year before replacing them at the said interval.

    Algeria, Armenia, Angola, Bahrain, Bolivia, Burundi, B.Virgin, Cambodia, Cameroon, Chile, Costa Rica, Cote d'Ivoire, Curacao, El Salvador, Gabon, Ghana, Georgia, Guatemala, Haiti, Honduras, Hong Kong, Iran, Jordan, Kenya, Macau, Malaysia, Mongolia, Mozambique, Myanmar, Nigeria, Nicaragua, Oman, Panama, Papua New Guinea, Peru, Philippines, Senegal, Seychelles, Syria, Tanzania, United Arab Emirates, Vietnam, Zaire, Zimbabwe

  2. Also inspect the air conditioner drive belts, if installed.

    If the vehicle is operated primarily under any of the following conditions, inspect the drive belts more often than the recommended intervals.

    1. Driving in dusty conditions

    2. Extended periods of idling or low speed operation

    3. Driving for long period in cold temperatures or driving regularly at short distance only

    4. Driving in extremely hot conditions

    5. Driving in mountainous conditions continually

    6. Driving for long period in extremely wet or heavy rain condition

  3. If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter more often than the recommended intervals.

    1. Purpose of vehicle use is police car, taxi or driving school car.

    2. Driving in dusty conditions

    3. Extended periods of idling or low speed operation

    4. Driving for long period in cold temperatures or driving regularly at short distance only

    5. Driving in extremely hot conditions

    6. Driving in mountainous conditions continually

  4. Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench indicator light display.

  5. Replace the engine oil when message/wrench indicator light is ON.

  6. If the vehicle is operated primarily under any of the following conditions, clean the fuel system at every 5,000 km (3,125 miles) for 20,000 km (12,500 miles) or less; after that, every 10,000 km (6,250 miles).

    1. Purpose of vehicle use is police car, taxi or driving school car.

    2. Extended periods of idling or low speed operation

    3. Driving in extremely hot conditions

  7. Use Mazda genuine deposit cleaner. Using non-genuine deposit cleaner would cause internal failure of the fuel system. Refer to (Search), (Search) for the details.

  8. Brunei, Cambodia, Indonesia, Laos, Malaysia, Myanmar, Philippines, Thailand, Vietnam

  9. Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may cause serious damage to the engine and cooling system.

  10. If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air filter more often than the recommended intervals.

  11. Inspect the battery electrolyte level, specific gravity and outer appearance. If the vehicle is operated in extremely hot and cold areas, inspect the battery electrolyte level, specific gravity and appearance every 10,000 km (6,250 miles) or 6 months. The sealed battery only requires an outer appearance inspection.

  12. If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.

  13. If this component has been submerged in water, the oil should be replaced.

  14. Check the tyre repair fluid expiration date every year when performing the periodic maintenance. Replace the tyre repair fluid bottle with new one before the expiration date.

Maintenance Monitor

Maintenance Monitor

  1. Select the icon on the home screen to display the Applications screen.

  2. Select “Vehicle Status Monitor”.

  3. Select “Maintenance” to display the maintenance list screen.

  4. Switch the tab and select the setting item you want to change.

You can customize settings in the setup display as follows:

Tab

Item

Explanation

Scheduled

Setting

Notification can be switched on/off.

Time (months)

Displays the time or distance until maintenance is due.

Select this item to set the maintenance period.

The wrench indication/indicator light in the instrument cluster will be illuminated when the remaining distance is less than 1,000 km or 600 mile, or the remaining number of days is less than 15 (whichever comes first).

Distance (mile or km)

Reset

Resets the time and distance to the initial values.

Once the system turns on, it needs to be reset whenever carrying out maintenance.

Tyre Rotation

Setting

Notification can be switched on/off.

Distance (mile or km)

Displays the distance until tyre rotation is due.

Select this item to set the tyre rotation distance.

The wrench indication/indicator light in the instrument cluster will be illuminated when the remaining distance is less than 1,000 km or 600 mile.

Reset

Resets the remaining distance to the initial value.

Once the system turns on, it needs to be reset whenever rotating the tyres.

Oil Change

Setting Interval*1

Notification can be switched on/off.

Distance (mile or km)

Displays the distance until the oil replacement is due.

Select this item to set the oil replacement distance.

The wrench indication/indicator light in the instrument cluster will be illuminated when the remaining distance is less than 1,000 km or 600 mile.

Reset*2

In flexible setting

Resets the remaining oil life to 100 %.

In fixed setting

Resets the remaining distance until oil replacement is due to the initial value. In addition, a vehicle engine control unit reset is required as follows:

Press and hold the instrument panel illumination knob with the ignition switched OFF, then switch it ON. Keep pressing the instrument panel illumination knob for more than 7 seconds.

In OFF setting

Press and hold the instrument panel illumination knob with the ignition switched OFF, then switch it ON. Keep pressing the instrument panel illumination knob for more than 7 seconds.

  1. The engine oil flexible maintenance setting is available (only some models). Consult an Authorised Mazda Repairer for details.

    When the engine oil flexible maintenance setting is selected, you will see the following items in the display. The vehicle calculates the remaining oil life based on the engine operating conditions and lets you know when an oil change is due by illuminating the wrench indicator light in the instrument cluster.

  2. Whenever the engine oil is replaced, the vehicle engine control unit reset is necessary.

Tab

Item

Explanation

Oil Change

Oil life (%)

Displays the engine oil life until the oil replacement is due.

The wrench indication/indicator light in the instrument cluster will be illuminated when remaining oil life distance is less than 1,000 km or 600 mile, or remaining days are less than 15 (whichever comes first).

Reset

Resets the remaining oil life to 100 %.

The system must be reset whenever replacing the engine oil.

Page top