Contact Authorised Mazda Repairer and Have Vehicle Inspected

If any of the following warning lights or the indicator light turns on/flashes, the system may have a malfunction. Contact an expert repairer, we recommend an Authorised Mazda Repairer to have your vehicle inspected.

Signal

Warning

Master Warning Indication/Warning Light (Some Models)

Type A instrument cluster

(Master warning indication)

Displays when notification of the system malfunctions is required.

Check the message indicated in the display and consult an expert repairer, we recommend an Authorised Mazda Repairer.

(Master warning light)

The master warning light displays when a warning message occurs.

This indicates a malfunction with the vehicle system. Check the message indicated in the display and consult an expert repairer, we recommend an Authorised Mazda Repairer.

For details, refer to the explanations for the warning/indicator lights, in the warning/indicator lights section, which match the symbol in the upper part of the display.

If a message is not indicated in the display, operate the INFO switch to display the “Warning” screen.

Refer to Message Indicated in Multi-information Display and INFO switch (Search).

Type B instrument cluster

The light illuminates continuously if any one of the following occurs. Consult an expert repairer, we recommend an Authorised Mazda Repairer.

  • There is a malfunction in the battery management system.

  • There is a malfunction in the brake switch.

(Amber)

Electric Vacuum Pump Warning Light

The light turns on if the electric vacuum pump system has a problem. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.

ABS Warning Light

If the ABS warning light stays on while you're driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS.

Should this happen, consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.

 


  • When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS warning light may illuminate. If this occurs, it is the result of the weak battery and does not indicate an ABS malfunction.

    Recharge the battery.

  • The brake assist system does not operate while the ABS warning light is illuminated.

Check Engine Light

If this light illuminates while driving, the vehicle may have a problem. It is important to note the driving conditions when the light illuminated and consult an expert repairer, we recommend an Authorised Mazda Repairer.

The check engine light may illuminate in the following cases:

  • The engine's electrical system has a problem.

  • The emission control system has a problem.

  • The fuel tank level being very low or approaching empty.

  • The fuel-filler cap is missing or not tightened securely.

If the check engine light remains on, or it flashes continuously , do not drive at high speeds and consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.

(Amber)

i-stop Warning Light (Some Models)

When the light is turned on

A problem in the system may be indicated under the following conditions. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.

  • The light does not turn on when the ignition is switched ON.

  • The light continues to remain on even though the i-stop OFF switch has been pressed while the engine is running.

When the light is flashing

The light continues to flash if the system has a malfunction. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.

(Amber)

i-ELOOP Indication/Warning Light (Some Models)

The Warning indication/Warning light turns on if there is any malfunction in the i-ELOOP system. Consult an expert repairer, we recommend an Authorised Mazda Repairer.

Automatic Transmission Indication/Warning Light (Some Models)

The indication/light illuminates when the transmission has a problem.

 


If the automatic transmission warning indication/light illuminates, the transmission has an electrical problem. Continuing to drive your Mazda in this condition could cause damage to your transmission. Consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.

(Turns on)

TCS/DSC Indicator Light

If the light stays on, the TCS, DSC or the brake assist system may have a malfunction and they may not operate correctly. Take your vehicle to an expert repairer, we recommend an Authorised Mazda Repairer.

Air Bag/Seat Belt Pretensioner System Warning Light

A system malfunction is indicated if the warning light constantly flashes, constantly illuminates or does not illuminate at all when the ignition is switched ON. If any of these occur, consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible. The system may not operate in an accident.

 


Never tamper with the air bag/pretensioner systems and always have an expert repairer, we recommend an Authorised Mazda Repairer perform all servicing and repairs:

Self-servicing or tampering with the systems is dangerous. An air bag/pretensioner could accidentally activate or become disabled causing serious injury or death.

Active Bonnet Warning Light (Some Models)

The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later.

A problem in the system may be indicated under the following conditions. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.

  • The light does not turn on when the ignition is switched ON.

  • Remains turned on/flashing.

 


Do not drive the vehicle with the active bonnet warning light turned on or flashing:

Driving the vehicle with the active bonnet warning light turned on or flashing is dangerous as the active bonnet mechanism may not activate normally and function as intended in the event the vehicle were to contact a pedestrian.

(Flashing)

Tyre Pressure Monitoring System Warning Light (Some Models)

If the tyre pressure monitoring system has a malfunction, the tyre pressure warning light flashes. Have your vehicle checked by an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.

 


If the tyre pressure monitoring system warning light illuminates or flashes, or the tyre pressure warning beep sound is heard, decrease vehicle speed immediately and avoid sudden manoeuvring and braking:

If the tyre pressure monitoring system warning light illuminates or flashes, or the tyre pressure warning beep sound is heard, it is dangerous to drive the vehicle at high speeds, or perform sudden manoeuvring or braking. Vehicle drivability could worsen and result in an accident.

To determine if you have a slow leak or a flat, pull over to a safe position where you can check the visual condition of the tyre and determine if you have enough air to proceed to a place where air may be added and the system monitored again by an expert repairer, we recommend an Authorised Mazda Repairer or a tyre repair station.

Do not ignore the TPMS Warning Light:

Ignoring the TPMS warning light is dangerous, even if you know why it is illuminated. Have the problem taken care of as soon as possible before it develops into a more serious situation that could lead to tyre failure and a dangerous accident.

FLAT TIRE Warning Light (Some Models)

If a run-flat tyre is punctured, the FLAT TIRE warning light illuminates in the instrument cluster, and a beep sound is heard for about 30 seconds.

Carefully drive the vehicle to the nearest Mazda repair shop immediately and have the flat tyre replaced.

Refer to Vehicle with Run-flat Tyres (Search).

 


Have the tyres checked or perform the appropriate repair as soon as possible by an expert repairer, we recommend an expert repairer, we recommend an Authorised Mazda Repairer:

When the flat tyre warning light illuminates or the tyre pressure warning beep sound is heard, it is dangerous to drive the vehicle at high speeds, or perform sudden manoeuvring or braking. Vehicle drivability could worsen and result in an accident.

When the flat tyre warning light illuminates or the tyre pressure warning beep sound is heard, decrease vehicle speed immediately and avoid sudden manoeuvring and braking.

(Red)

KEY Warning Indication (Some Models)

“Keyless System malfunction” is displayed

This message is displayed if the advanced keyless entry & push button start system has a problem.

Contact an expert repairer, we recommend an Authorised Mazda Repairer.

 


If the message is indicated, or the push button start indicator light (amber) flashes, the engine may not start. If the engine cannot be started, try starting it using the emergency operation for starting the engine, and have the vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.

Refer to Emergency Operation for Starting the Engine (Search).

(Amber)

KEY Warning Indication (Some Models)

“Set Power to OFF” is displayed

This message is displayed when the driver's door is opened without switching the ignition off.

“Key not found” is displayed

This message is displayed when any of the following operations is performed with the key out of the operational range or placed in areas inside the cabin where it is difficult for the key to be detected.

  • The push button start is pressed with the ignition switched off

  • The ignition is switched on

  • All doors are closed without switching the ignition off

(Red)

(Turns on)

KEY Warning Light (Some Models)

If any malfunction occurs in the keyless entry system, it illuminates continuously.

 


If the key warning indicator light illuminates or the push button start indicator light (amber) flashes, the engine may not start. If the engine cannot be started, try starting it using the emergency operation for starting the engine, and have the vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer as soon as possible.

Refer to Emergency Operation for Starting the Engine (Search).

(Turns on)

Lane Departure Warning System (LDWS) Warning Indication/Warning Light (Some Models)

  • The warning indication/warning light illuminates if there is a problem with the system. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.

  • The LDWS does not operate when the warning indication/warning light illuminates.

 


  • A problem in the system may be indicated under the following conditions. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.

    • When the warning indication/warning light illuminates while driving the vehicle.

      When the system is cancelled automatically, the warning indication/warning light illuminates. Normally, the system restores automatically and the warning indication/warning light turns off, however, if the warning indication/warning light illuminates, there may be a problem with the system.

    • The warning indication/warning light does not illuminate when the ignition is switched ON.

  • Always use tyres for all wheels that are of the specified size, and the same manufacture, brand, and tread pattern. In addition, do not use tyres with significantly different wear patterns on the same vehicle. If such improper tyres are used, the LDWS may not operate normally.

  • When an emergency spare tyre is used, the system may not operate normally.

 


If the windscreen area in front of the Forward Sensing Camera (FSC) is fogged or obstructed, the light turns on temporarily. If the light remains turned on, there may be a problem with the system.

(Amber)

Adaptive LED Headlights (ALH) Warning indication/Warning light (Some Models)

The warning indication/warning light illuminates if there is a problem with the system. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.

 


If the windscreen area in front of the Forward Sensing Camera (FSC) is fogged or obstructed, the warning indication/warning light illuminates temporarily. If the warning indication/warning light illuminates, there may be a problem with the system.

Blind Spot Monitoring (BSM) Warning Indication (Some Models)

The message is displayed when the system has a malfunction. Have your vehicle inspected by an expert repairer, we recommend an Authorised Mazda Repairer.

 


If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors can detect, the system may pause. However, it does not indicate a malfunction.

Blind Spot Monitoring (BSM) OFF Indicator Light (Some Models)

A problem in the system may be indicated under the following conditions.

Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.

  • The light does not turn on when the ignition is switched ON.

  • The light remains on even when the Blind Spot Monitoring (BSM) system can be operated.

  • The light turns on while driving the vehicle.

 


If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors can detect, the system may pause (The Blind Spot Monitoring (BSM) OFF indicator light in the instrument cluster illuminates). However, it does not indicate a malfunction.

Retractable Hardtop Warning Indication (Some Models)

The message is displayed when the system has a malfunction. Have your vehicle inspected by an expert repairer, we recommend an Authorised Mazda Repairer.

LED Headlight Warning Light

This light illuminates if there is a malfunction in the LED headlight. Have your vehicle inspected by an expert repairer, we recommend an Authorised Mazda Repairer.

Page top