Personalisation Features

Changeable System Settings/Equipment List

Safety Equipment (Search)

  • Advanced Smart City Brake Support (Advanced SCBS)

  • Smart City Brake Support Reverse (SCBS R)

  • Smart Brake Support (SBS)

  • Lane Departure Warning System (LDWS)

  • Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS)

  • Blind Spot Monitoring (BSM)

  • Distance Recognition Support System (DRSS)

  • Driver Attention Alert (DAA)

  • Traffic Sign Recognition System (TSR)

  • 360°View Monitor

  • Parking sensor system

Vehicle Equipment (Search)

  • Door locks

  • Keyless entry system

  • Illuminated entry system

  • Auto-wiper control

  • Auto-light control

  • Adaptive LED Headlights (ALH)

  • High Beam Control System (HBC)

  • Adaptive Front Lighting System (AFS)

  • Lights-on reminder

  • Coming home light

  • Leaving home light

  • Direction indicator

  • Three-flash turn signal

  • Ambient lights

Other Equipment/Functions (Search)

  • Advanced keyless entry system

  • Active Driving Display

  • Fuel Economy Monitor

  • Display

  • Sound quality

  • Clock

  • Each system

  • Running lights

  • Rear window defogger

Other Equipment/Functions

You can change the function settings according to your preference.

  • Personalisation features which can be changed differ depending on the vehicle specification.

  • Personalisation features which can be changed may change without notice depending on software updates.

The following personalisation features can be set or changed by the customer or an Authorised Mazda Repairer. Consult an Authorised Mazda Repairer for details.

Personalisation features which can be changed differ depending on the specification.

 

Advanced keyless entry system

How to change the volume of the door lock/unlock beep sound

  1. Switch the ignition off and close all of the doors and the boot lid.

  2. Open the driver's door.

  3. Within 30 seconds of opening the driver's door, press and hold the LOCK button on the key for 5 seconds or longer. (All of the doors and the liftgate are locked and unlocked when the LOCK button on the key is pressed and held for 5 seconds.)

    The beep sound activates at the currently set volume. The setting changes each time the LOCK button on the key is pressed and the beep sound activates at the set volume. (If the beep sound has been set to not activate, it will not activate.)

  4. The setting change is completed by doing any one of the following:

    • Switching the ignition to ACC or ON.

    • Closing the driver's door.

    • Opening the boot lid.

    • Not operating the key for ten seconds.

    • Pressing any button except the LOCK button on the key.

    • Pressing a request switch.

Method for changing functions using the centre display

  1. Select on the home screen and display the setting screen.

  2. Switch the tab to [Vehicle] and select the setting item you want to change.

Function and how it can be changed (underlined item is initial setting)

Advanced keyless entry system (Search)

Time for locking door automatically

90 seconds/60 seconds/30 seconds

Walk-away auto lock function operation/non-operational

ON/OFF

Beep volume when locking/unlocking

High/Medium/Low/Off

 

Active Driving Display

Method for changing functions using the centre display

  1. Select on the home screen and display the setting screen.

  2. Switch the tab to [AD-Disp] and select the setting item you want to change.

Function and how it can be changed (underlined item is initial setting)

Active Driving Display (Search)

Setting can be changed so that the Active Driving Display is not displayed.

ON/OFF

The display height (up/down position) can be changed.

–13―0―+13

(total: 27 steps)

The method for adjusting the display brightness (automatically/manually) can be changed.

Auto/Man.

The standard brightness while automatic adjustment is selected can be changed using the brightness adjustment.

–2―0―+2

(total: 5 steps)

The standard brightness while manual adjustment is selected can be changed using the brightness adjustment.

–20―0―+20

(total: 41 steps)

The display angle can be changed.

–3―0―+3

(total: 7steps)

Display/non-display of the navigation guidance

ON/OFF

 

Fuel Economy Monitor

Method for changing functions using the centre display

  1. Select on the home screen to display the application screen.

  2. Select the [Fuel Economy Monitor].

  3. Select to display the Menu screen.

  4. Select on the screen and select the setting item you want to change.

Function and how it can be changed (underlined item is initial setting)

Fuel Economy Monitor (Search)

Display/non-display of ending display

ON/OFF

 

Display

Method for changing functions using the centre display

  1. Select on the home screen and display the setting screen.

  2. Switch the tab to [Display] and select the setting item you want to change.

Function and how it can be changed (underlined item is initial setting)

Screen setting

Turn Display Off

ON/OFF

Turn Display Off and Show Clock

ON/OFF

Mode

Auto/Day/Night

Brightness

–5―0―+5

Contrast

–5―0―+5

Turn Display Off

When you select , the display turns off.

Turn Display Off and Show Clock

When you select , the screen turns off and the clock is displayed.

Auto/Day/Night

:

(With auto-light control)

Switches screen automatically according to position lights illumination condition. However, when the light sensor detects that the surrounding area is bright such as when the position lights are turned on in the daytime, the screen is switched to the daytime screen*1

(Without auto-light control)

Switches screen automatically according to position lights illumination condition.*1

: Daytime screen setting

: Nighttime screen setting

  1. The display is constantly on daytime screen when the illumination dimmer is cancelled.

 

Sound quality

Method for changing functions using the centre display

  1. Select on the home screen and display the setting screen.

  2. Switch the tab to [Sound] and select the setting item you want to change.

Function and how it can be changed (underlined item is initial setting)

Sound quality

Bass (Low pitch sound)

–6―0―+6

(-Side: Low pitch reduction、+Side: Low pitch enhancement)

Treble (Treble sound)

–6―0―+6

(-Side: Treble reduction、+Side: Treble enhancement)

Fade (Front/Rear volume balance)

Front: Front speaker volume enhancement

Rear: Rear speaker volume enhancement

Balance (Left/right volume balance)

Right: Right speaker volume enhancement

Left: Left speaker volume enhancement

ALC*1 (Automatic volume adjustment)

0―7

(Adjustment at seven levels)

Bose® Centerpoint*2 (Automatic surround level adjustment)

ON/OFF

Bose® AUDIOPILOT*2 (Automatic volume adjustment)

ON/OFF

Beep (Audio operation sound)

ON/OFF

  1. Standard audio

  2. Bose® sound system

ALC (Automatic volume adjustment)

The automatic level control (ALC) is a feature that automatically adjusts audio volume and sound quality according to the vehicle speed. The volume increases in accordance with the increase in vehicle speed, and decreases as vehicle speed decreases.

Bose® Centerpoint (Automatic surround level adjustment)

Centerpoint®*1 lets vehicle owners enjoy a Bose® surround sound experience from their existing MP3s and satellite radio.

Specifically engineered to meet the unique demands of reproducing surround sound in a vehicle.

Converts stereo signals to multiple channels allowing greater precision when reproducing the sound.

An enhanced algorithm to simultaneously create a wider, more spacious sound field.

Bose® AUDIOPILOT (Automatic volume adjustment)

When driving, background noise can interfere with enjoying music.

AUDIOPILOT®*2 noise compensation technology continuously adjusts the music to compensate for background noise and vehicle speed.

It reacts only to sustained noise sources and not intermittent ones, such as speed bumps.

An enhanced DSP algorithm allows faster and more effective compensation for unusual situations, such as driving on a very rough road or at high speeds.

  1. Centerpoint® is a registered trademark of Bose Corporation.

  2. AUDIOPILOT® is a registered trademark of Bose Corporation.

 

Clock

Method for changing functions using the centre display

  1. Select on the home screen and display the setting screen.

  2. Switch the tab to [Clock] and select the setting item you want to change.

Function and how it can be changed (underlined item is initial setting)

Clock

Adjust Time

The time can be adjusted when the GPS sync function is turned off.

Press + to advance the hour/minute, and select - to move the hour/minute back.

AM/PM can only be selected with the 12-hour clock display.

GPS Sync

ON/OFF

Time Format

12h/24h

Time Zone Select

When it's not synchronized with GPS, select the region you want to specify.

Daylight Savings Time

Turns the daylight saving time setting on/off.

When ON, the time advances 1 hour. When OFF, it returns to normal time.

 

Each system

Method for changing functions using the centre display

  1. Select on the home screen and display the setting screen.

  2. Switch the tab to [System] and select the setting item you want to change.

Function and how it can be changed (underlined item is initial setting)

System setting/information

Display/non-display of button explanation

ON/OFF

Language*1

UK English/Depends on market*1

Temperature

゜F/゜C

Distance

mi/km

Music Database Update

Used to update Gracenote®. Gracenote® is used with USB Audio, and provides:

  • Supplementary music information (Such as song name, artist name)

  • Voice recognition assistance for Play Artist and Play Album

    Refer to Gracenote® Database (Search).

Factory Reset

Memory and settings are initialized to the factory settings.

The initialization launches by selecting the button.

About

Agreements and Disclaimers

Verify the disclaimer and agree.

Version Information

Can verify the current audio unit OS version and Gracenote® Database version.

  1. Available only in display from the centre display.

 

Running lights

If you want to change the running lights setting, please consult an Authorised Mazda Repairer.

Function and how it can be changed (underlined item is initial setting)

Running lights (Search)

Operational/non-operational

ON/OFF

 

Rear window defogger

If you want to change the rear window defogger setting, please consult an Authorised Mazda Repairer.

Function and how it can be changed (underlined item is initial setting)

Rear window defogger (Search)

Operation time

15 minutes/Continuous*1

  1. The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of the rear window defogger has been changed to Continuous.

Page top