Owner Maintenance

Overhead light

1. Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens, and then remove the lens by carefully prying on the edge of the lens with the flathead screwdriver.

2. Disconnect the bulb by pulling it out.

    

   

3. Install the new bulb in the reverse order of the removal procedure.

Boot light

1. Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens, and then remove the lens by carefully prying on the edge of the lens with the flathead screwdriver.

    

   

2. Disconnect the connector from the unit.

3. Disconnect the bulb by pulling it out.

    

   

4. Install the new bulb in the reverse order of the removal procedure.