Scheduled Maintenance
Scheduled Maintenance
After the prescribed period, continue to follow the described maintenance at the recommended intervals.
Emission control and related systems
The ignition and fuel systems are highly important to the emission control system and to efficient engine operation. Do not tamper with them.
All inspections and adjustments must be made by an expert repairer, we recommend an Authorised Mazda Repairer.
Europe
My Mazda Service
The maintenance monitor alerts regarding the next maintenance due. The next maintenance is due at least every 20,000 km or 12 months after the respective last maintenance.
Maintenance |
1st |
2nd |
3rd |
4th |
5th |
6th |
7th |
8th |
9th |
10th |
11th |
12th |
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SKYACTIV-G 2.0, AND SKYACTIV-G 2.5 |
|||||||||||||
Spark plugs*1 |
Replace every 120,000 km (75,000 miles). |
||||||||||||
Air filter*2 |
R |
R |
R |
R |
|||||||||
Fuel lines and hoses |
I |
I |
I |
I |
I |
I |
|||||||
Evaporative system (if installed) |
I |
I |
I |
I |
|||||||||
Engine oil & filter*3*4 |
R |
R |
R |
R |
R |
R |
R |
R |
R |
R |
R |
R |
|
SKYACTIV-D 2.2 |
|||||||||||||
Engine oil & filter |
Except Ukraine*3*4*6 |
R |
R |
R |
R |
R |
R |
R |
R |
R |
R |
R |
R |
Ukraine*5*6 |
Replace every 10,000 km (6,250 miles) or 12 months. |
||||||||||||
Fuel lines and hoses |
Except Ukraine |
I |
I |
I |
I |
I |
I |
||||||
Ukraine |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
|
Fuel filter |
R |
R |
R |
R |
|||||||||
Fuel injection system*7 |
I |
I |
I |
I |
|||||||||
Fuel system (Drain water) |
*8 |
||||||||||||
Air filter*2 |
C |
C |
R |
C |
C |
R |
C |
C |
R |
C |
C |
R |
|
SKYACTIV-G 2.0, SKYACTIV-G 2.5, AND SKYACTIV-D 2.2 |
|||||||||||||
Drive belts*9 |
I |
I |
I |
I |
|||||||||
Cooling system |
I |
I |
I |
I |
I |
I |
|||||||
Engine coolant*10 |
Replace at first 200,000 km (125,000 miles) or 10 years; after that, every 100,000 km (62,500 miles) or 5 years. |
||||||||||||
Battery*11 |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
|
Brake lines, hoses and connections |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
|
Brake fluid*12 |
R |
R |
R |
R |
R |
R |
|||||||
Parking brake |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
|
Disc brakes |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
|
Steering operation and linkages |
I |
I |
I |
I |
I |
I |
|||||||
Manual transaxle oil |
Replace every 180,000 km (112,500 miles). |
||||||||||||
Rear differential oil |
*13 |
||||||||||||
Transfer oil |
*13 |
||||||||||||
Front and rear suspension, ball joints and wheel bearing axial play |
I |
I |
I |
I |
I |
I |
|||||||
Driveshaft dust boots |
I |
I |
I |
I |
I |
I |
|||||||
Exhaust system and heat shields |
Inspect every 80,000 km (50,000 miles) or 5 years. |
||||||||||||
Bolts and nuts on chassis and body |
T |
T |
T |
T |
T |
T |
|||||||
Body condition (for rust, corrosion and perforation) |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
|
Cabin air filter (if installed) |
R |
R |
R |
R |
R |
R |
|||||||
Tyres (including spare tyre) (with inflation pressure adjustment)*14 |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
|
Emergency flat tyre repair kit (if installed)*15 |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
I |
|
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
T: Tighten
D: Drain
Remarks:
-
In the countries below, inspect the spark plugs at every 10,000 km (6,250 miles) or 12 months before replacing them at the said interval.
Albania, Bosnia and Herzegovina, Bulgaria, Croatia, Latvia, Macedonia, Moldova, Montenegro, Romania, Serbia, Slovakia, Ukraine
-
If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air filter more often than the recommended intervals.
-
Flexible setting is factory preset for some countries in Europe. Consult an Authorised Mazda Repairer for details. Flexible setting can be set if the vehicle is operated mainly where none of the following conditions apply.
-
Purpose of vehicle use is police car, taxi or driving school car.
-
Driving in dusty conditions
-
Extended periods of idling or low speed operation
Once the flexible maintenance is selected, the vehicle calculates the remaining oil life based on engine operating conditions and lets you know when an oil change is due by illuminating the wrench indicator light in the instrument cluster.
Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench indicator light display.
-
-
If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter at every 10,000 km (6,250 miles) or shorter.
-
Purpose of vehicle use is police car, taxi or driving school car.
-
Driving in dusty conditions
-
Extended periods of idling or low speed operation
-
Driving for long period in cold temperatures or driving regularly at short distance only
-
Driving in extremely hot conditions
-
Driving in mountainous conditions continually
-
-
If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter at every 5,000 km (3,125 miles) or 6 months.
-
Purpose of vehicle use is police car, taxi or driving school car.
-
Driving in dusty conditions
-
Extended periods of idling or low speed operation
-
Driving for long period in cold temperatures or driving regularly at short distance only
-
Driving in extremely hot conditions
-
Driving in mountainous conditions continually
-
-
For SKYACTIV-D 2.2, reset the engine oil data whenever replacing the engine oil regardless of the message/wrench indicator light display.
-
Implement the fuel injection amount correction.
-
Drain water in the fuel system if the indicator lights is ON.
-
Also inspect the air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 20,000 km (12,500 miles) or 12 months.
-
Driving in dusty conditions
-
Extended periods of idling or low speed operation
-
Driving for long period in cold temperatures or driving regularly at short distance only
-
Driving in extremely hot conditions
-
Driving in mountainous conditions continually
-
-
Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may cause serious damage to the engine and cooling system.
-
Inspect the battery electrolyte level, specific gravity and outer appearance. The sealed battery only requires an outer appearance inspection.
-
If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.
-
If this component has been submerged in water, the oil should be replaced.
-
Tyre rotation is recommended every 10,000 km (6,250 miles).
-
Check the tyre repair fluid expiration date every year when performing the periodic maintenance. Replace the tyre repair fluid bottle with new one before the expiration date.
Except Europe
Maintenance Monitor
Maintenance Monitor (Type A audio)
“Oil Change” with flexible setting*1 is available. Consult an Authorised Mazda Repairer for details*2. When the engine oil flexible maintenance setting is selected, the wrench indicator light in the instrument cluster will be illuminated when remaining oil life becomes less than 1,000 km (600 mile), or remaining days are less than 15 (Whichever comes first).
Reset method
Press and hold the instrument panel illumination knob with the ignition switched off, then switch it on. Keep pressing the instrument panel illumination knob for more than 5 seconds. The master warning light will flash for a few seconds when the reset is completed.

-
The engine oil flexible maintenance setting is available (only some models). Based on the engine operating conditions, the onboard computer in your vehicle calculates the remaining oil life.
-
When the engine oil flexible maintenance setting is selected, the system must be reset whenever replacing the engine oil regardless of the wrench indicator light display.
Maintenance Monitor (Type B audio)
-
Select the
icon on the home screen to display the “Applications” screen.
-
Select “Vehicle Status Monitor”.
-
Select “Maintenance” to display the maintenance list screen.
-
Switch the tab and select the setting item you want to change.
You can customize settings in the setup display as follows:
Tab |
Item |
Explanation |
---|---|---|
Scheduled |
Setting |
Notification can be switched on/off. |
Time (months) |
Displays the time or distance until maintenance is due. Select this item to set the maintenance period. The wrench indication/indicator light in the instrument cluster will be illuminated when the remaining distance is less than 1,000 km or 600 mile, or the remaining number of days is less than 15 (whichever comes first). |
|
Distance (km or mile) |
||
Reset |
Resets the time and distance to the initial values. Once the system turns on, it needs to be reset whenever carrying out maintenance. |
|
Tyre Rotation |
Setting |
Notification can be switched on/off. |
Distance (km or mile) |
Displays the distance until tyre rotation is due. Select this item to set the tyre rotation distance. The wrench indication/indicator light in the instrument cluster will be illuminated when the remaining distance is less than 1,000 km or 600 mile. |
|
Reset |
Resets the remaining distance to the initial value. Once the system turns on, it needs to be reset whenever rotating the tyres. |
|
Oil Change |
Setting*1 |
Notification can be switched on/off. |
Distance (km or mile) |
Displays the distance until the oil replacement is due. Select this item to set the oil replacement distance. The wrench indication/indicator light in the instrument cluster will be illuminated when the remaining distance is less than 1,000 km or 600 mile. |
|
Reset*2 |
Resets the remaining distance to the initial value. Once the system turns on, it needs to be reset whenever replacing the engine oil. |
|
-
The engine oil flexible maintenance setting is available (only some models). Consult an Authorised Mazda Repairer for details.
When the engine oil flexible maintenance setting is selected, you will see the following items in the display. The vehicle calculates the remaining oil life based on the engine operating conditions and lets you know when an oil change is due by illuminating the wrench indicator light in the instrument cluster.
-
Whenever the engine oil is replaced, the vehicle engine control unit reset is necessary for SKYACTIV-D 2.2.
Your Authorised Mazda Repairer will be able to reset the engine control unit or refer to the vehicle engine control unit reset procedure (Search).
Tab |
Item |
Explanation |
---|---|---|
Oil Change |
Oil life (%) |
Displays the engine oil life until the oil replacement is due. The wrench indication/indicator light in the instrument cluster will be illuminated when remaining oil life distance is less than 1,000 km (600 mile), or remaining days are less than 15 (whichever comes first). |
Reset |
Resets the remaining oil life to 100 %. The system must be reset whenever replacing the engine oil. |
|